EV1HMC8413LP2F Amplifier Evaluation Board
Analog Devices Inc. EV1HMC8413LP2F Amplifier Evaluation Board consists of a 4-layer printed circuit board (PCB) fabricated from 10mil thick, Rogers 4350B and Isola 370HR, copper-clad, forming a nominal thickness of 62 mils. The RFIN and RFOUT ports on the EV1HMC8413LP2F are populated with 3.5mm, female coaxial connectors, and the corresponding RF traces have a 50Ω characteristic impedance. The EV1HMC8413LP2F is populated with components suitable for use over the entire −40°C to +85°C operating temperature range of the HMC8413. A through calibration path is provided between the J1 and J2 connectors to calibrate board trace losses. J1 and J2 must be populated with RF connectors to use the through calibration path.
NO SE HALLARON RESULTADOS..
Intente modificar su término de búsqueda a continuación, o visite nuestro Centro de ayuda.
Intente modificar su término de búsqueda a continuación, o visite nuestro Centro de ayuda.
Sugerencias de búsqueda
- Comprobar que el número del componente o las palabras clave estén escritas correctamente
- Use menos palabras clave o palabras distintas
- Busque 1 número de componente cada vez
- Aplique 1 filtro cada vez