Todos los resultados (377)

Seleccionar Imagen N.° de pieza Fabricante: Descripción Hoja de datos Disponibilidad Precio: (PEN) Filtre los resultados en la tabla por precio unitario en función de su cantidad. Cantidad RoHS
Marki Microwave Acondicionamiento de señales The T3-07 is a high performance mixer featuring LO/RF from 1 MHz to 7 GHz and IF from 1 MHz to 4 GHz.
1Se espera el 4/01/2027
S/4,589.76
Min.: 1
Mult.: 1
No
Marki Microwave Herramientas de desarrollo RF The EVAL-MT3H-0113H is a connectorized evaluation board for the MT3H-0113HSM passive MMIC Surface mount 1.5 - 13 GHz High Dynamic Range Mixer. Plazo de entrega no en existencias 2 Semanas
S/2,842.15
Min.: 1
Mult.: 1
Máx.: 5
Marki Microwave Herramientas de desarrollo RF The EVB-MDPX-0305P is a connectorized evaluation board for the MDPX-0305PSM is a MMIC surface mount diplexer capable of multiplexing low frequency DC to 3 GHz and high frequency 5 to 26.5 GHz signals. Plazo de entrega no en existencias 2 Semanas
S/2,877.53
Min.: 1
Mult.: 1
Máx.: 5
Marki Microwave Acondicionamiento de señales The MFHP-00001BH MMIC highpass filter is an ideal solution for small form factor, high rejection filtering. The MFHP-00001BH features a 1.9 GHz 3 dBc cutoff frequency and 16 dB passband return loss. Available in a connectorized bullet housing. Plazo de entrega no en existencias 12 Semanas
S/1,857.50
Min.: 1
Mult.: 1
Marki Microwave Mezclador de RF The MM1-0832LSM is a GaAs MMIC double balanced mixer that is optimized for high frequency applications. MM1-0832LSM is a high frequency X band mixer that works well as both an up and down converter through Ka band. Plazo de entrega no en existencias 10 Semanas
S/737.82
S/614.86
Min.: 1
Mult.: 1
Marki Microwave Acondicionamiento de señales A broadband MMIC LO buffer amplifier that is capable of producing at least +18 dBm up to 67 GHz. This amplifier can be used to drive L- or H-diode mixers from 35-67 GHz, or L- or H-diode IQ mixers from 35-60 GHz. Plazo de entrega no en existencias 18 Semanas
S/13,263.42
Min.: 1
Mult.: 1
Marki Microwave Acondicionamiento de señales The ADA-1030 can be used as a frequency extender to enhance the frequency range of a <15 GHz synthesizer up to 30 GHz. Useful for lab testing, test and measurement, and prototype systems. Plazo de entrega no en existencias 18 Semanas
S/5,521.28
Min.: 1
Mult.: 1
Marki Microwave Acondicionamiento de señales A wideband low noise amplifier capable of providing 24 dB gain and a low 1.3 dB typical noise figure from 6 to 20 GHz. The ADM-8556 is an ideal linear signal amplifier for applications requiring low power consumption and small form-factors. Plazo de entrega no en existencias 18 Semanas
S/7,996.95
Min.: 1
Mult.: 1
Marki Microwave Acondicionamiento de señales The ADM-8558 is a wideband distributed low noise amplifier capable of providing 16 dB gain and +23 dBm OIP3 from 0.005 to 20 GHz and a low 1.8 dB typical noise figure from 7 to 15 GHz. Plazo de entrega no en existencias 18 Semanas
S/7,996.95
Min.: 1
Mult.: 1
Marki Microwave Acondicionamiento de señales A high-linearity low noise amplifier capable of providing 15 dB gain, 2.1 dB noise figure and +27 dBm OIP3 from 300 kHz to 10 GHz. It can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers. Plazo de entrega no en existencias 18 Semanas
S/7,996.95
Min.: 1
Mult.: 1
Marki Microwave Acondicionamiento de señales A high-linearity, low noise amplifier capable of providing 10.5 dB gain and +26 dBm OIP3 across a broad 0.2-20 GHz bandwidth. Plazo de entrega no en existencias 18 Semanas
S/7,996.95
Min.: 1
Mult.: 1
Marki Microwave Acondicionamiento de señales The ADM-8625PC is a high-linearity low noise amplifier capable of providing 18 dB gain, 1.4 dB noise figure and +29 dBm OIP3 from 750 MHz to 8 GHz. Plazo de entrega no en existencias 18 Semanas
S/7,996.95
Min.: 1
Mult.: 1
Marki Microwave Acondicionamiento de señales A high-linearity, high gain, low noise distributed amplifier capable of providing +22dBm output power up to 35 GHz. When driven with an input power of 0 to +5 dBm, it can provide sufficient LO drive to power all H and most S diode mixers to 40GHz. Plazo de entrega no en existencias 18 Semanas
S/7,996.95
Min.: 1
Mult.: 1
Marki Microwave Acondicionamiento de señales A high-linearity amplifier capable of providing +18 dBm output power up to 10 GHz. The ADM1-8095PC can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers. Plazo de entrega no en existencias 18 Semanas
S/7,996.95
Min.: 1
Mult.: 1
Marki Microwave Adaptadores RF - En series The ADPFKFK is a 2.92mm Female to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended. Plazo de entrega no en existencias 18 Semanas
S/363.36
Min.: 1
Mult.: 1
Marki Microwave Adaptadores RF - Entre series The ADPFVFK is a 2.4mm Female to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 or 6 mm fixed wrench recommended. Plazo de entrega no en existencias 18 Semanas
S/537.75
Min.: 1
Mult.: 1
Marki Microwave Adaptadores RF - En series The ADPFVFV is a 2.4mm Female to 2.4mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-50 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended. Plazo de entrega no en existencias 18 Semanas
S/508.71
Min.: 1
Mult.: 1
Marki Microwave Adaptadores RF - Entre series The ADPFVMK is a 2.4mm Female to 2.92mm Male straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended. Plazo de entrega no en existencias 18 Semanas
S/537.75
Min.: 1
Mult.: 1
Marki Microwave Adaptadores RF - En series The ADPMKFK is a 2.92mm Male to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended. Plazo de entrega no en existencias 18 Semanas
S/363.36
Min.: 1
Mult.: 1
Marki Microwave Adaptadores RF - En series The ADPMKMK is a 2.92mm Male to 2.92mm Male straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended. Plazo de entrega no en existencias 18 Semanas
S/363.36
Min.: 1
Mult.: 1
Marki Microwave Adaptadores RF - En series The ADPMVFV is a 2.4mm Male to 2.4mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-50 GHz bandwidth. 3/8" torque wrench and 7.1 mm fixed wrench recommended. Plazo de entrega no en existencias 18 Semanas
S/508.71
Min.: 1
Mult.: 1
Marki Microwave Adaptadores RF - En series The ADPMVMV is a 2.4mm Male to 2.4mm Male straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-50 GHz bandwidth. 3/8" torque wrench and 7.1 mm fixed wrench recommended. Plazo de entrega no en existencias 18 Semanas
S/508.71
Min.: 1
Mult.: 1
Marki Microwave Acondicionamiento de señales A wideband mmWave amplifier in our M-package enabling operation up to 95 GHz in a connectorized form. This amplifier provides typical +19 dBm output power, 11 dB gain making it suitable for driving mmWave mixers. Plazo de entrega no en existencias 18 Semanas
S/17,741.82
Min.: 1
Mult.: 1
Marki Microwave Acondicionamiento de señales A broadband MMIC LO buffer amplifier that efficiently provides high gain and output power over a 20-55 GHz frequency band. It is designed to provide a strong, flat output power response when driven with an input power at 0 dBm. Plazo de entrega no en existencias 18 Semanas
S/7,372.04
Min.: 1
Mult.: 1
Marki Microwave Acondicionamiento de señales A general-purpose broadband MMIC driver amplifier that provides +21 dBm output power suitable for driving a Marki H or L diode mixer at 11-38 GHz and S diode mixer from 15 32 GHz. The amplifier also has excellent return losses and gain flatness. Plazo de entrega no en existencias 18 Semanas
S/5,212.84
Min.: 1
Mult.: 1