Transceptores SIC CAN de alta velocidad TJA1465/TJA1466

NXP Semiconductors TJA1465 and TJA1466 High-Speed CAN Signal Improvement Capability (SIC) Transceivers with partial networking sleep mode implement CAN SIC as defined in ISO11898-2:2024 parameter sets A-C. The NXP Semiconductors TJA146x are fully interoperable with the high-speed classical CAN and CAN FD protocols and are fully developed and certified to be ISO 26262 ASIL-B compliant. CAN signal improvement significantly reduces signal ringing on a network, allowing reliable CAN FD communication at 5Mbit/s in larger topologies, and due to a much tighter bit timing symmetry performance, even enables CAN FD communication up to 8Mbit/s.

Resultados: 6
Seleccionar Imagen N.° de pieza Fabricante: Descripción Hoja de datos Disponibilidad Precio: (PEN) Filtre los resultados en la tabla por precio unitario en función de su cantidad. Cantidad RoHS Modelo ECAD Serie Estilo de montaje Paquete / Cubierta Velocidad de transmisión de datos Voltaje de alimentación - Mín. Voltaje de alimentación - Máx. Temperatura de trabajo mínima Temperatura de trabajo máxima Corriente de suministro operativa Protección ESD Empaquetado
NXP Semiconductors Interfaz IC CAN CAN SIC transceiver with partial networking [ASIL B] 4,169En existencias
Cinta cortada
S/7.71
S/5.84
S/5.18
S/4.63
Envase tipo carrete
S/4.01
Ver
Min.: 1
Mult.: 1
: 2,500
TJA1465 SMD/SMT SO-14 8 Mb/s 4.5 V 5.5 V - 40 C + 150 C 42 mA With ESD Protection Reel, Cut Tape
NXP Semiconductors Interfaz IC CAN CAN SIC transceiver with partial networking [ASIL B] 8,071En existencias
Cinta cortada
S/7.90
S/5.84
S/5.29
S/4.75
Ver
Envase tipo carrete
S/3.93
Min.: 1
Mult.: 1
: 6,000
TJA1465 SMD/SMT HVSON-14 8 Mb/s 4.5 V 5.5 V - 40 C + 150 C 42 mA With ESD Protection Reel, Cut Tape
NXP Semiconductors Interfaz IC CAN CAN SIC transceiver with partial networking and GPIO pins [ASIL B] 5,472En existencias
Cinta cortada
S/8.25
S/6.11
S/5.57
S/4.94
Ver
Envase tipo carrete
S/4.16
Min.: 1
Mult.: 1
: 6,000
TJA1465 SMD/SMT DHVQFN-18 8 Mb/s 4.5 V 5.5 V - 40 C + 150 C 42 mA With ESD Protection Reel, Cut Tape
NXP Semiconductors Interfaz IC CAN CAN SIC transceiver with partial networking, watchdog, RESET pin, FAIL-SAFE/LIMP pin and GPIO pins [ASIL B, 1.8 V VIO] 6,000En existencias
Cinta cortada
S/7.98
S/5.88
S/5.33
S/4.79
Ver
Envase tipo carrete
S/3.97
Min.: 1
Mult.: 1
: 6,000
TJA1466 SMD/SMT DHVQFN-18 8 Mb/s 4.5 V 5.5 V - 40 C + 150 C 42 mA With ESD Protection Reel, Cut Tape
NXP Semiconductors Interfaz IC CAN CAN SIC transceiver with partial networking, watchdog, RESET pin, FAIL-SAFE/LIMP pin and GPIO pins [ASIL B, 1.8 V VIO] 5,985En existencias
Cinta cortada
S/7.86
S/5.88
S/5.29
S/4.75
Ver
Envase tipo carrete
S/3.97
Min.: 1
Mult.: 1
: 6,000
TJA1466 SMD/SMT DHVQFN-18 8 Mb/s 4.5 V 5.5 V - 40 C + 150 C 42 mA With ESD Protection Reel, Cut Tape
NXP Semiconductors Interfaz IC CAN CAN SIC transceiver with partial networking, watchdog, RESET pin, FAIL-SAFE/LIMP pin and GPIO pins [ASIL B, 1.8 V VIO] 5,970En existencias
Cinta cortada
S/7.98
S/5.88
S/5.33
S/4.79
Ver
Envase tipo carrete
S/3.97
Min.: 1
Mult.: 1
: 6,000
TJA1466 SMD/SMT DHVQFN-18 8 Mb/s 4.5 V 5.5 V - 40 C + 150 C 42 mA With ESD Protection Reel, Cut Tape