B82804A Gate Drive Transformers

TDK B82804A Series Gate Drive Transformers are used to couple gate-drive circuits to MOSFETs and IGBTs operating at switch frequencies within a range of 150KHz through several MHz. Using a miniaturized EP5 core, the dimensions of the transformers are 8.1 x 6.7 x 5.4mm, resulting in significant space savings on the circuit board. TDK B82804A Series Gate Drive Transformers offer low stray inductances and parasitic capacitances between winding are only 25 to 95pF. Short-term dielectric strength is tested to 1500VDC for all types in the B82804A Series Gate Drive Transformers are designed for ambient temperatures of up to +85ºC and operating temperatures of up to +125°C. Applications include half- and full-bridge converters as well as in frequency converters or inverters.

Resultados: 5
Seleccionar Imagen N.° de pieza Fabricante: Descripción Hoja de datos Disponibilidad Precio: (PEN) Filtre los resultados en la tabla por precio unitario en función de su cantidad. Cantidad RoHS Modelo ECAD Inductancia Longitud Ancho Altura
TDK Transformadores de pulso 264uH, 2 Outputs Turns Ratio: 1:1:1 8,589En existencias
Cinta cortada
S/13.20
S/11.95
S/11.44
S/11.09
Envase tipo carrete
S/10.04
Ver
Min.: 1
Mult.: 1
: 850
264 uH 6.7 mm 6.1 mm 5.4 mm
TDK Transformadores de pulso 300uH, 2 Outputs Turns Ratio: 2.5:1:1 479En existencias
Cinta cortada
S/14.13
S/12.77
S/11.79
S/11.44
Envase tipo carrete
S/8.49
Ver
Min.: 1
Mult.: 1
: 850
300 uH 6.7 mm 6.1 mm 5.4 mm
TDK Transformadores de pulso 317uH, 2 Outputs Turns Ratio: 2:1:1 328En existencias
Cinta cortada
S/14.13
S/12.77
S/11.79
S/11.44
Envase tipo carrete
S/9.77
Ver
Min.: 1
Mult.: 1
: 850
317 uH 6.7 mm 6.1 mm 5.4 mm
TDK Transformadores de pulso 690uH Turns Ratio: 1.5:1 497En existencias
Cinta cortada
S/14.95
S/13.55
S/12.11
S/11.76
Envase tipo carrete
S/10.43
Ver
Min.: 1
Mult.: 1
: 850
690 uH 6.7 mm 6.1 mm 5.4 mm
TDK Transformadores de pulso 473uH Turns Ratio: 2.5:1
1,700Se espera el 16/04/2027
Cinta cortada
S/15.73
S/13.39
S/12.26
S/11.91
Ver
Envase tipo carrete
S/10.47
Min.: 1
Mult.: 1
: 850
473 uH 6.7 mm 6.1 mm 5.4 mm