Todos los resultados (1,862)

Filtros

Opciones de disponibilidad
Seleccionar Imagen N.° de pieza Fabricante: Descripción Hoja de datos Disponibilidad Precio: (PEN) Filtre los resultados en la tabla por precio unitario en función de su cantidad. Cantidad RoHS
SparkFun Accesorios SparkFun LEDs - those blinky things. A must have for power indication pin status opto-electronic sensors and fun blinky displays.This is a very basic 5mm LED with a yellow lens. It has a typical forward voltage of 2.0V and a rated forward current of 20mA.F 9En existencias
S/1.95
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Sometimes you want a small input and a single button just won't cut it. A 5-way tactile switch allows for a joystick-like interface in a very small package. These are surface mount but easily soldered. 22En existencias
S/15.38
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This DC Blower really moves some air! Pulling about 1Amp @ 12VDC this blower is rated at 16CFM (although it seems like more to us). We've used this blower to build small hovercrafts and to cool off on a hot day they're also handy for inflating "tra 93En existencias
206Se espera el 19/11/2026
S/44.34
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This 0.012" Muscle Wire (aka shape memory Nitinol) is a one foot long piece of nickel-titanium alloy that can flex and contract when a specific amount of heat or current is applied to it. If you are asking yourself "What sorcery is this?!" We assur 10En existencias
15Se espera el 18/11/2026
S/10.70
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun So much power and light from such a small package. This 5 pack of "Warm" white 3 Watt aluminum backed PCBs is sure to shed a lot of light on any project you add it to. These LEDs act as any other LED except these little guys require much more power w 14En existencias
S/51.11
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun 2x5 Pin Shrouded Header 34En existencias
S/7.01
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Heat Sink Compound 229En existencias
S/10.70
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Stackable Header 2x23 Pin Female 267En existencias
S/12.85
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a simple 2x3 male PTH header. This header is in the common configuration for an ISP connector. Each pin has a spacing of 0.1" in between each other.Documents:Datasheet 44En existencias
S/3.11
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun These stackable headers are made to work with the SparkFun ESP32 Thing Plus to connect to shield with a Feather footprint. This set includes one 12-pin and one 16-pin header; the pins are spaced by 0.1".Each set of headers allows you to stack Feather 41En existencias
S/8.84
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Soldering Iron Stand 2En existencias
S/30.17
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun 2.4GHz Duck Antenna 2.2dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance. 4" long. Not sure which RF connector you need on your antenna? Check out our RF Connector Guide 3En existencias
S/58.19
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Need range? 2.4GHz Large Duck Antenna 5dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance. This antenna mates nicely with the Reverse Polarized SMA Connector. 6En existencias
S/72.01
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a 4" connector cable that interfaces U.FL RF connectors to regular SMA connectors. This cable is commonly used to connect larger GPS antennas and quad-band cellular antennas. 106En existencias
S/22.38
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This cute little coax is a champ in our RF kit! It has a right angle female U.FL (aka I-PEX) connector on both ends. Now instead of jerry-rigging a few U.FL to SMA cables together we can go straight from one U.FL device to another. As an added bonus 51En existencias
S/10.70
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Unlock the hidden potential of your motherboard s USB headers. This 6-foot extension cable features a 4-pin female header on one end and a panel-mountable USB-A connector on the other allowing you to place a standard USB port exactly where you nee 25En existencias
S/11.48
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Rotary Encoder 10En existencias
S/17.52
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a standard 12mm square momentary button. What we really like is the large button head and good tactile feel (it 'clicks' really well). This button is great for user input on a PCB or a good big reset button on a breadboard. Breadboard friend 71En existencias
470Se espera el 10/11/2026
S/2.92
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a simple LED-illuminated tactile button with a clear cap. It's just like a basic tactile button but it lights up blue! So now you can get visual feedback or light up your project. These have a 12mm body and are rated for 50mA. They don't ea 15En existencias
S/10.86
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Potentiometers are incredibly useful whether you're controlling the volume on your stereo or the 'mood lighting' in your room. The problem with traditional potentiometers is the fact that your microcontroller doesn't have an easy way to interface wi 17En existencias
S/6.81
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This simple on-off switch is rated for 20A at 12V but who cares about all that it looks way awesome. These toggle switches come with those missile switch covers that make your project look like something out of a spy movie. They're also a great safe 117En existencias
S/18.49
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun These plastic LED holders have a black finish and only need the LED and the holder to be snapped into place easily and effectively no screwing anything into place. These LED holders accept a 5mm LED and mount into an 19/64" diameter hole. 387En existencias
S/2.34
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Tactile Button SMD (6mm) 55En existencias
S/2.92
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun So much power and light from such a small package. This 5 pack of "Cool" white 3 Watt aluminum backed PCBs is sure to shed a lot of light on any project you add it to. These LEDs act as any other LED except these little guys require much more power w 2En existencias
S/51.11
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Amphenol FCI Clinchr Conn. (3 POS,F) 7En existencias
S/7.47
Min.: 1
Mult.: 1