Todos los resultados (1,945)

Filtros

Opciones de disponibilidad
Seleccionar Imagen N.° de pieza
 Fabricante:
Descripción Hoja de datos Disponibilidad Precio: (PEN) Filtre los resultados en la tabla por precio unitario en función de su cantidad.
Cantidad RoHS
SparkFun Computadoras de placa simple The micro:bit v2 Go Bundle is the quickest and most economical way to get started with the micro:bit ecosystem. While the standalone board is great for those who already have a workshop full of cables this bundle is designed for those who want to hi 20En existencias
Min.: 1
Mult.: 1
SparkFun Alojamientos de cables y cabecera This is a super small 2x5 pin female PTH header. This header is in the common configuration for JTAG applications. Each pin has a spacing of 1.27mm in between each other.
Hoja de datos
76En existencias
Min.: 1
Mult.: 1

SparkFun Motores de vibración A vibration motor! This itty-bitty shaftless vibratory motor is perfect for non-audible indicators. Use in any number of applications to indicate to the wearer when a status has changed. All moving parts are protected within the housing. With a 2-3.
Hoja de datos
107En existencias
Min.: 1
Mult.: 1

SparkFun Módulos Zigbee - 802.15.4 After years of popularity with the XBee Series 1 and XBee Series 2 Pro Modules we now have the XBee Series 3 Pro which brings the best of both worlds. XBee 3 not only handles 802.15.4 and ZigBee but also BLE protocols and you can now talk to the m
Hoja de datos
5En existencias
Min.: 1
Mult.: 1

SparkFun Módulos multiprotocolo The Edimax 2-in-1 Wi-Fi 4 N150 & Bluetooth 4.2 Nano USB Adapter is a nano-sized USB Wi-Fi adapter with Bluetooth 4.2 that supports Wi-Fi up to 150Mbps while allowing users to connect to all the latest Bluetooth devices such as mobile phones ta
Hoja de datos
7En existencias
Min.: 1
Mult.: 1

SparkFun Herramientas de desarrollo de interfaz The SparkFun ESLOV to Qwiic Bridge lets you quickly and easily connect Qwiic breakouts to Arduino boards with an ESLOV connector for I2C communication. ESLOV and Qwiic allow for simple assembly of I2C circuits without requiring soldering. The ESLOV t 16En existencias
Min.: 1
Mult.: 1
SparkFun Clips de prueba IC Test Clip SOIC 8-Pin 6En existencias
Min.: 1
Mult.: 1

SparkFun Fotodiodos The BPW34 is a tiny general purpose PiN photodiode. This photodiode has a ton of uses one of which is to use it is a mini solar cell to power your project. The cell is sensitive to a wide range of light wavelengths (430-1100nm) so it should produc 34En existencias
Min.: 1
Mult.: 1
SparkFun Conectores USB The Raspberry Pi Micro USB to USB-C Adapter is a small adapter that allows a male Micro-B USB power adapter the ability to power devices with a female USB Type C port specifically the Raspberry Pi 4. This adapter is perfect for those looking to powe 18En existencias
Min.: 1
Mult.: 1
SparkFun Kits de robótica educativa This pan/tilt bracket consists of two brackets and all the hardware you need to attach them to make a pan/tilt mechanism using two servo motors. We recommend our small servo motors listed below.Note: Servos are not included. The sub-micro servo size 2En existencias
Min.: 1
Mult.: 1
SparkFun Módulos de video This is the Logitech C270 Webcam. With a sleek compact look and a black finish this is not just for looks. This economical choice provides a 720p/30FPS HD resolution in a 16:9 widescreen format. The Logitech C270 webcam is compatible with most major 5En existencias
Min.: 1
Mult.: 1
SparkFun Ventiladores tangenciales CC The Raspberry Pi 4 Case Fan works with Raspberry Pi 4 and the Raspberry Pi 4 Case. Designed for overclockers and other power users it keeps your Raspberry Pi 4 at a comfortable operating temperature even under heavy load. The temperature-controlled 6En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios para antenas This aluminum adapter converts the very common 1/4" thread found on camera tri-pods and mono-pods to the 5/8" 11-TPI (threads per inch) found on high-end surveying antennas and equipment. It's ideal for mounting RTK surveying antennas onto a monopod 91En existencias
Min.: 1
Mult.: 1
SparkFun Kits de robótica educativa This is the Wheel Encoder Kit from DAGU a simple add-on to any wheeled robot that can help measure the speed or distance the chassis travels. Each wheel encoder kit consists of two neodymium 8-pole magnets with rubber hubs and two hall-effect sensor
Hoja de datos
28En existencias
Min.: 1
Mult.: 1
SparkFun Sensores de movimiento y posición montados en placa This basic piezo sensor from Measurement Specialties is often used for flex touch vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when the film moves back and forth. A simple resistor should get the voltage 5En existencias
Min.: 1
Mult.: 1

SparkFun Sensores de calidad del aire Carbon Monoxide Sensor MQ-7
Hoja de datos
21En existencias
Min.: 1
Mult.: 1

SparkFun Sensores de calidad del aire The MQ-9B is a CO and CH gas-detection sensor from Winsen. The sensing material of the MQ-9B is SnO2 which has a low conductivity in clean air. It detects carbon monoxide (1.5V) by cycling between high and low temperatures. The sensor s conduct 14En existencias
Min.: 1
Mult.: 1
SparkFun Destornilladores, llaves de tuercas y llaves de cubo There's nothing worse than getting ready for a good hack and then realizing that you can't even get the box open because you don't have the right screwdriver. Sure we all have a few Phillips-head drivers and maybe a few slotted drivers but what abou 11En existencias
11En pedido
Min.: 1
Mult.: 1
SparkFun Temporizadores y productos de apoyo This is a common 555 timer/oscillator from TI. A classic for all of those first year circuits projects where you need to blink an LED generate tone and thousands of other great beginning projects. Google around for a huge list of resources and exam 332En existencias
Min.: 1
Mult.: 1
SparkFun Herramientas de desarrollo del sensor de presión Flexiforce Pressure Sensor - 100lbs. 24En existencias
Min.: 1
Mult.: 1

SparkFun Herramientas de desarrollo Bluetooth - 802.15.1 If you are looking for a board that can truly handle your next Internet of Things project look no further. The SparkFun Artemis Thing Plus combines the powerful Artemis module with our popular Thing Plus footprint. It packs 1MB flash 384k RAM an 19En existencias
Min.: 1
Mult.: 1
SparkFun Módulos multiprotocolo The ESP32-WROOM-32E is a powerful generic Wi-Fi+BT+BLE MCU module that targets a wide variety of applications ranging from low-power sensor networks to the most demanding tasks such as voice encoding music streaming and MP3 decoding. At the core
Hoja de datos
4En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Have you ever needed to power a project while in your car? Now you can without having to drag a computer along with this cost effective 5V 2.4A USB car charger. These car chargers have a standard USB 'A' connector for the output so you can power you 1,028En existencias
Min.: 1
Mult.: 1

SparkFun Accesorios de programador This is a handy AVR programming cable that incorporates both the 10-pin and 6-pin ISP programming interfaces.Cable is about 12" long and mates with pins on 1/10in centers. 69En existencias
Min.: 1
Mult.: 1

SparkFun Diodos de Conmutación de Señal Baja This is a very common signal diode - 1N4148. Use this for signals up to 200mA of current. 107En existencias
Min.: 1
Mult.: 1