Herramientas de desarrollo RF The EVB-MM1A-0832HP is a connectorized evaluation board for the MM1A-0832HPSM passive MMIC Surface mount 8 - 32 GHz Double Balanced Mixer with LO Amplifier.
EVB-MM1A-0832HP
Marki Microwave
1:
S/2,189.30
1 Se espera el 24/08/2026
Nuevo en Mouser
N.º de artículo de Mouser
10-EVB-MM1A-0832HP
Nuevo en Mouser
Marki Microwave
Herramientas de desarrollo RF The EVB-MM1A-0832HP is a connectorized evaluation board for the MM1A-0832HPSM passive MMIC Surface mount 8 - 32 GHz Double Balanced Mixer with LO Amplifier.
1 Se espera el 24/08/2026
Comprar
Min.: 1
Mult.: 1
Detalles
Herramientas de desarrollo RF The EVB-MPD4-0108 is a connectorized evaluation board for the MPD4-0108CSP2 MMIC 1-8GHz 4-Way power divider/power splitter.
EVB-MPD4-0108
Marki Microwave
1:
S/2,189.30
1 Se espera el 21/08/2026
Nuevo producto
N.º de artículo de Mouser
10-EVB-MPD4-0108
Nuevo producto
Marki Microwave
Herramientas de desarrollo RF The EVB-MPD4-0108 is a connectorized evaluation board for the MPD4-0108CSP2 MMIC 1-8GHz 4-Way power divider/power splitter.
1 Se espera el 21/08/2026
Comprar
Min.: 1
Mult.: 1
Detalles
Mezclador de RF The MM1-0115HPSM is a GaAs MMIC double balanced mixer that features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth. MM1-0115HPSM works well as both an up and down converter through Ku band.
MM1-0115HPSM-2
Marki Microwave
1:
S/834.16
9 Se espera el 19/10/2026
Nuevo en Mouser
N.º de artículo de Mouser
10-MM1-0115HPSM-2
Nuevo en Mouser
Marki Microwave
Mezclador de RF The MM1-0115HPSM is a GaAs MMIC double balanced mixer that features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth. MM1-0115HPSM works well as both an up and down converter through Ku band.
9 Se espera el 19/10/2026
Comprar
Min.: 1
Mult.: 1
Detalles
Herramientas de desarrollo RF The EVB-MPD4-0218 is a connectorized evaluation board for the MPD4-0218CSP3 MMIC 2-18 GHz 4-Way power divider/power splitter.
Marki Microwave EVB-MPD4-0218
EVB-MPD4-0218
Marki Microwave
1:
S/2,189.30
Plazo de entrega 7 Semanas
Nuevo producto
N.º de artículo de Mouser
10-EVB-MPD4-0218
Nuevo producto
Marki Microwave
Herramientas de desarrollo RF The EVB-MPD4-0218 is a connectorized evaluation board for the MPD4-0218CSP3 MMIC 2-18 GHz 4-Way power divider/power splitter.
Plazo de entrega 7 Semanas
Comprar
Min.: 1
Mult.: 1
Detalles
Herramientas de desarrollo RF This is the evaluation board for the ABDS-10170PSM - a GaAs active MMIC balun in a 3mm QFN surface mount package. Its frequency ranges from DC to 30 GHz and offers 9 dB differential to single ended gain (low end limited by DC block).
Marki Microwave EVB-ABDS-10170P
EVB-ABDS-10170P
Marki Microwave
1:
S/2,631.56
1 Se espera el 10/09/2026
Nuevo producto
N.º de artículo de Mouser
10-EVB-ABDS-10170P
Nuevo producto
Marki Microwave
Herramientas de desarrollo RF This is the evaluation board for the ABDS-10170PSM - a GaAs active MMIC balun in a 3mm QFN surface mount package. Its frequency ranges from DC to 30 GHz and offers 9 dB differential to single ended gain (low end limited by DC block).
1 Se espera el 10/09/2026
Comprar
Min.: 1
Mult.: 1
Detalles
Mezclador de RF The MM2-0530LSM is a passive MMIC triple balanced mixer. It features a broadband IF port that spans from 2 to 20 GHz, and has excellent spurious suppression. The MM2-0530LSM is 4x4 mm QFN packaged.
MM2-0530LSM-2
Marki Microwave
1:
S/1,340.77
25 Se espera el 22/10/2026
Nuevo en Mouser
N.º de artículo de Mouser
10-MM2-0530LSM-2
Nuevo en Mouser
Marki Microwave
Mezclador de RF The MM2-0530LSM is a passive MMIC triple balanced mixer. It features a broadband IF port that spans from 2 to 20 GHz, and has excellent spurious suppression. The MM2-0530LSM is 4x4 mm QFN packaged.
25 Se espera el 22/10/2026
Comprar
Min.: 1
Mult.: 1
Detalles
Amplificador de RF A small, low power, and economical T3 driver or T3A pre-amplifier. It is a GaAs PHEMT distributed amplifier in a 3mm QFN surface mount package.
ADM-0012-5931SM
Marki Microwave
1:
S/423.31
Plazo de entrega no en existencias 10 Semanas
Nuevo en Mouser
N.º de artículo de Mouser
10-ADM-0012-5931SM
Nuevo en Mouser
Marki Microwave
Amplificador de RF A small, low power, and economical T3 driver or T3A pre-amplifier. It is a GaAs PHEMT distributed amplifier in a 3mm QFN surface mount package.
Plazo de entrega no en existencias 10 Semanas
1
S/423.31
5
S/352.74
10
S/302.33
25
S/274.89
Comprar
Min.: 1
Mult.: 1
Detalles
Amplificador de RF A wideband distributed low noise amplifier capable of providing 19 dB gain and +29 dBm OIP3 from DC to 18 GHz and a low 1.7 dB typical noise figure from 4 to 14 GHz.ADM-8344 is available A 4mm QFN and can be supplied from a single positive bias.
ADM-8344PSM
Marki Microwave
25:
S/510.70
Plazo de entrega no en existencias 10 Semanas
Nuevo producto
N.º de artículo de Mouser
10-ADM-8344PSM
Nuevo producto
Marki Microwave
Amplificador de RF A wideband distributed low noise amplifier capable of providing 19 dB gain and +29 dBm OIP3 from DC to 18 GHz and a low 1.7 dB typical noise figure from 4 to 14 GHz.ADM-8344 is available A 4mm QFN and can be supplied from a single positive bias.
Plazo de entrega no en existencias 10 Semanas
Comprar
Min.: 25
Mult.: 25
Detalles
Amplificador de RF The ADM-8475PSM is a high-linearity, low noise amplifier capable of providing 13 dB gain, +26 dBm OIP3 and 2 dB noise figure across a broad 0.5-18 GHz bandwidth.
ADM-8475PSM
Marki Microwave
25:
S/295.87
Plazo de entrega no en existencias 10 Semanas
N.º de artículo de Mouser
10-ADM-8475PSM
Marki Microwave
Amplificador de RF The ADM-8475PSM is a high-linearity, low noise amplifier capable of providing 13 dB gain, +26 dBm OIP3 and 2 dB noise figure across a broad 0.5-18 GHz bandwidth.
Plazo de entrega no en existencias 10 Semanas
Comprar
Min.: 25
Mult.: 25
Detalles
Amplificador de RF The ADM-8536PSM is one of the world's smallest 2-20 GHz high linearity, low noise amplifier solution, featuring 10.5 dB gain, +25 dBm OIP3 and 2.5 dB noise figure, making it suitable for use in RF front-ends.
ADM-8536PSM
Marki Microwave
1:
S/455.62
Plazo de entrega no en existencias 10 Semanas
Nuevo en Mouser
N.º de artículo de Mouser
10-ADM-8536PSM
Nuevo en Mouser
Marki Microwave
Amplificador de RF The ADM-8536PSM is one of the world's smallest 2-20 GHz high linearity, low noise amplifier solution, featuring 10.5 dB gain, +25 dBm OIP3 and 2.5 dB noise figure, making it suitable for use in RF front-ends.
Plazo de entrega no en existencias 10 Semanas
1
S/455.62
5
S/379.67
10
S/325.45
25
S/295.87
Comprar
Min.: 1
Mult.: 1
Detalles
Amplificador de RF A high-linearity, low noise amplifier capable of providing 11.5 dB gain and +25 dBm OIP3 across a broad 0.2-20 GHz bandwidth. It's low power consumption, high dynamic range and size make it an ideal choice for RF front end, low SWaP applications.
ADM-8624PSM
Marki Microwave
25:
S/295.87
Plazo de entrega no en existencias 10 Semanas
N.º de artículo de Mouser
10-ADM-8624PSM
Marki Microwave
Amplificador de RF A high-linearity, low noise amplifier capable of providing 11.5 dB gain and +25 dBm OIP3 across a broad 0.2-20 GHz bandwidth. It's low power consumption, high dynamic range and size make it an ideal choice for RF front end, low SWaP applications.
Plazo de entrega no en existencias 10 Semanas
Comprar
Min.: 25
Mult.: 25
Detalles
Amplificador de RF A high-linearity low noise amplifier capable of providing 18 dB gain, 1.5 dB noise figure and +27 dBm OIP3 from 750 MHz to 8 GHz. It can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
ADM-8625PSM
Marki Microwave
1:
S/117.24
Plazo de entrega no en existencias 10 Semanas
Nuevo en Mouser
N.º de artículo de Mouser
10-ADM-8625PSM
Nuevo en Mouser
Marki Microwave
Amplificador de RF A high-linearity low noise amplifier capable of providing 18 dB gain, 1.5 dB noise figure and +27 dBm OIP3 from 750 MHz to 8 GHz. It can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
Plazo de entrega no en existencias 10 Semanas
Comprar
Min.: 1
Mult.: 1
Detalles
Amplificador de RF A wideband distributed low noise amplifier capable of providing 16 dB gain and +25 dBm OIP3 from 2 to 20 GHz and a low 1.8 dB typical noise figure from 8 to 16 GHz.
ADM-9027PSM
Marki Microwave
1:
S/542.69
Plazo de entrega no en existencias 10 Semanas
Nuevo producto
N.º de artículo de Mouser
10-ADM-9027PSM
Nuevo producto
Marki Microwave
Amplificador de RF A wideband distributed low noise amplifier capable of providing 16 dB gain and +25 dBm OIP3 from 2 to 20 GHz and a low 1.8 dB typical noise figure from 8 to 16 GHz.
Plazo de entrega no en existencias 10 Semanas
1
S/542.69
5
S/452.23
10
S/387.62
25
S/352.39
Comprar
Min.: 1
Mult.: 1
Detalles
Amplificador de RF A wideband distributed low noise amplifier capable of providing 16 dB gain and +24 dBm OIP3 from 10MHz to 26 GHz and a low 2.5 dB typical noise figure from 6 to 20 GHz.
ADM-9028PSM
Marki Microwave
25:
S/361.22
Plazo de entrega no en existencias 10 Semanas
Nuevo producto
N.º de artículo de Mouser
10-ADM-9028PSM
Nuevo producto
Marki Microwave
Amplificador de RF A wideband distributed low noise amplifier capable of providing 16 dB gain and +24 dBm OIP3 from 10MHz to 26 GHz and a low 2.5 dB typical noise figure from 6 to 20 GHz.
Plazo de entrega no en existencias 10 Semanas
Comprar
Min.: 25
Mult.: 25
Detalles
Amplificador de RF A wideband distributed amplifier capable of providing 14.5 dB gain and +31 dBm OIP3 from 100MHz to 22 GHz. The ADM-9181PSM is an ideal linear signal amplifier for applications requiring low power consumption and small form-factors.
ADM-9181PSM
Marki Microwave
1:
S/575.55
Plazo de entrega no en existencias 10 Semanas
Nuevo producto
N.º de artículo de Mouser
10-ADM-9181PSM
Nuevo producto
Marki Microwave
Amplificador de RF A wideband distributed amplifier capable of providing 14.5 dB gain and +31 dBm OIP3 from 100MHz to 22 GHz. The ADM-9181PSM is an ideal linear signal amplifier for applications requiring low power consumption and small form-factors.
Plazo de entrega no en existencias 10 Semanas
1
S/575.55
5
S/479.63
10
S/411.09
25
S/373.72
Comprar
Min.: 1
Mult.: 1
Detalles
Adaptadores RF - En series The ADPFKFK is a 2.92mm Female to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended.
ADPFKFK
Marki Microwave
1:
S/315.92
Plazo de entrega no en existencias 12 Semanas
Nuevo producto
N.º de artículo del Fabricante
ADPFKFK
N.º de artículo de Mouser
10-ADPFKFK
Nuevo producto
Marki Microwave
Adaptadores RF - En series The ADPFKFK is a 2.92mm Female to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended.
Plazo de entrega no en existencias 12 Semanas
Comprar
Min.: 1
Mult.: 1
Detalles
Adaptadores RF - Entre series The ADPFVFK is a 2.4mm Female to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 or 6 mm fixed wrench recommended.
ADPFVFK
Marki Microwave
1:
S/467.61
Plazo de entrega no en existencias 12 Semanas
Nuevo producto
N.º de artículo del Fabricante
ADPFVFK
N.º de artículo de Mouser
10-ADPFVFK
Nuevo producto
Marki Microwave
Adaptadores RF - Entre series The ADPFVFK is a 2.4mm Female to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 or 6 mm fixed wrench recommended.
Plazo de entrega no en existencias 12 Semanas
Comprar
Min.: 1
Mult.: 1
Adaptadores RF - En series The ADPFVFV is a 2.4mm Female to 2.4mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-50 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended.
ADPFVFV
Marki Microwave
1:
S/442.30
Plazo de entrega no en existencias 12 Semanas
Nuevo producto
N.º de artículo del Fabricante
ADPFVFV
N.º de artículo de Mouser
10-ADPFVFV
Nuevo producto
Marki Microwave
Adaptadores RF - En series The ADPFVFV is a 2.4mm Female to 2.4mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-50 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended.
Plazo de entrega no en existencias 12 Semanas
Comprar
Min.: 1
Mult.: 1
Adaptadores RF - Entre series The ADPFVMK is a 2.4mm Female to 2.92mm Male straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
ADPFVMK
Marki Microwave
1:
S/467.61
Plazo de entrega no en existencias 12 Semanas
Nuevo producto
N.º de artículo del Fabricante
ADPFVMK
N.º de artículo de Mouser
10-ADPFVMK
Nuevo producto
Marki Microwave
Adaptadores RF - Entre series The ADPFVMK is a 2.4mm Female to 2.92mm Male straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
Plazo de entrega no en existencias 12 Semanas
Comprar
Min.: 1
Mult.: 1
Adaptadores RF - En series The ADPMKFK is a 2.92mm Male to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
ADPMKFK
Marki Microwave
1:
S/334.52
Plazo de entrega no en existencias 12 Semanas
Nuevo producto
N.º de artículo del Fabricante
ADPMKFK
N.º de artículo de Mouser
10-ADPMKFK
Nuevo producto
Marki Microwave
Adaptadores RF - En series The ADPMKFK is a 2.92mm Male to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
Plazo de entrega no en existencias 12 Semanas
Comprar
Min.: 1
Mult.: 1
Detalles
Adaptadores RF - En series The ADPMKMK is a 2.92mm Male to 2.92mm Male straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
ADPMKMK
Marki Microwave
1:
S/334.52
Plazo de entrega no en existencias 12 Semanas
Nuevo producto
N.º de artículo del Fabricante
ADPMKMK
N.º de artículo de Mouser
10-ADPMKMK
Nuevo producto
Marki Microwave
Adaptadores RF - En series The ADPMKMK is a 2.92mm Male to 2.92mm Male straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
Plazo de entrega no en existencias 12 Semanas
Comprar
Min.: 1
Mult.: 1
Detalles
Adaptadores RF - Entre series The ADPMVFK is a 2.4mm Male to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended.
ADPMVFK
Marki Microwave
1:
S/495.13
Plazo de entrega no en existencias 12 Semanas
Nuevo producto
N.º de artículo del Fabricante
ADPMVFK
N.º de artículo de Mouser
10-ADPMVFK
Nuevo producto
Marki Microwave
Adaptadores RF - Entre series The ADPMVFK is a 2.4mm Male to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended.
Plazo de entrega no en existencias 12 Semanas
Comprar
Min.: 1
Mult.: 1
Detalles
Adaptadores RF - En series The ADPMVFV is a 2.4mm Male to 2.4mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-50 GHz bandwidth. 3/8" torque wrench and 7.1 mm fixed wrench recommended.
ADPMVFV
Marki Microwave
1:
S/468.35
Plazo de entrega no en existencias 12 Semanas
Nuevo producto
N.º de artículo del Fabricante
ADPMVFV
N.º de artículo de Mouser
10-ADPMVFV
Nuevo producto
Marki Microwave
Adaptadores RF - En series The ADPMVFV is a 2.4mm Male to 2.4mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-50 GHz bandwidth. 3/8" torque wrench and 7.1 mm fixed wrench recommended.
Plazo de entrega no en existencias 12 Semanas
Comprar
Min.: 1
Mult.: 1
Detalles
Adaptadores RF - Entre series The ADPMVMK is a 2.4mm Male to 2.92mm Male straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
ADPMVMK
Marki Microwave
1:
S/495.13
Plazo de entrega no en existencias 12 Semanas
Nuevo producto
N.º de artículo del Fabricante
ADPMVMK
N.º de artículo de Mouser
10-ADPMVMK
Nuevo producto
Marki Microwave
Adaptadores RF - Entre series The ADPMVMK is a 2.4mm Male to 2.92mm Male straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
Plazo de entrega no en existencias 12 Semanas
Comprar
Min.: 1
Mult.: 1
Detalles
Adaptadores RF - En series The ADPMVMV is a 2.4mm Male to 2.4mm Male straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-50 GHz bandwidth. 3/8" torque wrench and 7.1 mm fixed wrench recommended.
ADPMVMV
Marki Microwave
1:
S/468.35
Plazo de entrega no en existencias 12 Semanas
Nuevo producto
N.º de artículo del Fabricante
ADPMVMV
N.º de artículo de Mouser
10-ADPMVMV
Nuevo producto
Marki Microwave
Adaptadores RF - En series The ADPMVMV is a 2.4mm Male to 2.4mm Male straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-50 GHz bandwidth. 3/8" torque wrench and 7.1 mm fixed wrench recommended.
Plazo de entrega no en existencias 12 Semanas
Comprar
Min.: 1
Mult.: 1
Detalles