Marki Microwave Acondicionamiento de señales

Resultados: 568
Seleccionar Imagen N.° de pieza
 Fabricante:
Descripción Hoja de datos Disponibilidad Precio: (PEN) Filtre los resultados en la tabla por precio unitario en función de su cantidad.
Cantidad RoHS Modelo ECAD Tipo de producto
Producto
Frecuencia
Banda de frecuencias
Régimen de voltaje
Impedancia
Estilo de terminación
Paquete / Cubierta
Temperatura de trabajo mínima
Temperatura de trabajo máxima
Marki Microwave Acondicionamiento de señales A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 10 GHz bandwidth.
Hoja de datos
1Se espera el 26/08/2026
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Acondicionamiento de señales The BT-0026SMG is a packaged bias tee featuring excellent insertion loss and superior isolations over a broad 20 MHz to 26 GHz bandwidth.
Hoja de datos
7Se espera el 19/08/2026
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Acondicionamiento de señales The C13-0140 is a broadband 1-40 GHz, 13 dB directional coupler. The multisection tri-plate stripline design exhibits excellent coupling flatness and VSWR at all ports.
Hoja de datos
1Se espera el 24/12/2026
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Acondicionamiento de señales Available in either a connectorized or miniature surface mount package (0.240 inch x 0.150 inch), the DPX-0R5 is a low cost, high performance diplexer. The unique design offers high pass/low pass signal routing/multiplexing with excellent isolation.
Hoja de datos
5Se espera el 19/08/2026
Min.: 1
Mult.: 1
Signal Conditioning
Marki Microwave Acondicionamiento de señales 2-Way Wilkinson power dividers can be used for both in-phase power splitting and power combining applications.
Hoja de datos
1Se espera el 31/08/2026
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Acondicionamiento de señales This general purpose high pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during up-conversion or for removing spurious interference and noise.
Hoja de datos
1Se espera el 31/08/2026
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Acondicionamiento de señales The MM1-1857H is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form factor.
Hoja de datos
1Se espera el 15/12/2026
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Acondicionamiento de señales MMIC Doubler Output 20-50 GHz, +10 to +15 dBm, 3mm QFN
Hoja de datos
12Se espera el 19/08/2026
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Acondicionamiento de señales A resistive 2-way power divider that features broadband operation from DC to 30 GHz. Resistive power dividers offer 6 dB nominal insertion loss and excellent amplitude and phase balance.
Hoja de datos
1Se espera el 8/01/2027
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Acondicionamiento de señales A surface mount resistive 2-way power divider that features broadband operation from DC to 30 GHz. Resistive power dividers offer 6 dB nominal insertion loss and excellent amplitude and phase balance.
Hoja de datos
10Se espera el 11/01/2027
Min.: 1
Mult.: 1
Signal Conditioning
Marki Microwave Acondicionamiento de señales A resistive 2-way power divider that features broadband operation from DC to 40 GHz. Resistive power dividers offer 6 dB nominal insertion loss and excellent amplitude and phase balance.
Hoja de datos
1Se espera el 2/10/2026
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Acondicionamiento de señales 2-Way Wilkinson power dividers can be used for both in-phase power splitting and power combining applications.
Hoja de datos
1Se espera el 13/11/2026
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Acondicionamiento de señales The C20-0R520 is a broadband 0.5-20 GHz, 20 dB directional coupler. The multisection tri-plate stripline design exhibits excellent coupling flatness and VSWR at all ports.
Hoja de datos
Plazo de entrega no en existencias 14 Semanas
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Acondicionamiento de señales A broadband MMIC LO buffer amplifier that is capable of producing at least +18 dBm up to 67 GHz. This amplifier can be used to drive L- or H-diode mixers from 35-67 GHz, or L- or H-diode IQ mixers from 35-60 GHz.
Hoja de datos
Plazo de entrega no en existencias 12 Semanas
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Acondicionamiento de señales The ABDS-10170PSM is a GaAs active MMIC balun in a 3mm QFN surface mount package. It offers 3 dB differential to single ended gain from low frequencies (limited by DC block) to 30 GHz.
Hoja de datos
Plazo de entrega no en existencias 10 Semanas
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Acondicionamiento de señales The ABSD-10168PSM is a GaAs active MMIC balun in a 3mm QFN surface mount package. Its frequency ranges from DC to 30 GHz and offers 3 dB single ended to differential gain (low end limited by DC block).
Hoja de datos
Plazo de entrega no en existencias 10 Semanas
Min.: 25
Mult.: 25

Signal Conditioning
Marki Microwave Acondicionamiento de señales The ADA-1030 can be used as a frequency extender to enhance the frequency range of a <15 GHz synthesizer up to 30 GHz. Useful for lab testing, test and measurement, and prototype systems.
Hoja de datos
Plazo de entrega no en existencias 12 Semanas
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Acondicionamiento de señales A wideband low noise amplifier capable of providing 24 dB gain and a low 1.3 dB typical noise figure from 6 to 20 GHz. The ADM-8556 is an ideal linear signal amplifier for applications requiring low power consumption and small form-factors.
Hoja de datos
Plazo de entrega no en existencias 12 Semanas
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Acondicionamiento de señales The ADM-8558 is a wideband distributed low noise amplifier capable of providing 16 dB gain and +23 dBm OIP3 from 0.005 to 20 GHz and a low 1.8 dB typical noise figure from 7 to 15 GHz.
Hoja de datos
Plazo de entrega no en existencias 12 Semanas
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Acondicionamiento de señales A high-linearity low noise amplifier capable of providing 15 dB gain, 2.1 dB noise figure and +27 dBm OIP3 from 300 kHz to 10 GHz. It can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
Hoja de datos
Plazo de entrega no en existencias 12 Semanas
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Acondicionamiento de señales A high-linearity, low noise amplifier capable of providing 10.5 dB gain and +26 dBm OIP3 across a broad 0.2-20 GHz bandwidth.
Hoja de datos
Plazo de entrega no en existencias 12 Semanas
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Acondicionamiento de señales The ADM-8625PC is a high-linearity low noise amplifier capable of providing 18 dB gain, 1.4 dB noise figure and +29 dBm OIP3 from 750 MHz to 8 GHz.
Hoja de datos
Plazo de entrega no en existencias 12 Semanas
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Acondicionamiento de señales A high-linearity, high gain, low noise distributed amplifier capable of providing +22dBm output power up to 35 GHz. When driven with an input power of 0 to +5 dBm, it can provide sufficient LO drive to power all H and most S diode mixers to 40GHz.
Hoja de datos
Plazo de entrega no en existencias 12 Semanas
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Acondicionamiento de señales A high-linearity amplifier capable of providing +18 dBm output power up to 10 GHz. The ADM1-8095PC can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
Hoja de datos
Plazo de entrega no en existencias 12 Semanas
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Acondicionamiento de señales A wideband mmWave amplifier in our M-package enabling operation up to 95 GHz in a connectorized form. This amplifier provides typical +19 dBm output power, 11 dB gain making it suitable for driving mmWave mixers.
Hoja de datos
Plazo de entrega no en existencias 12 Semanas
Min.: 1
Mult.: 1

Signal Conditioning