WORLD-BEAM® QS18 Series Photoelectric Sensors

Banner Engineering WORLD-BEAM® QS18 Series Photoelectric Sensors offer a 10VDC to 30VDC voltage range and bright LED status indicators visible from 360°. These sensors feature IP67-rated ABS housing and LED and coaxial lenses. The coaxial optics detect clear and mirror-like surfaces and operate at short distances from the reflector, enabling precise leading-edge detection. Providing simple pushbutton operation, the user aligns the sensor with the reflector, pushes and holds the button for 2 seconds, and begins inspecting. Banner Engineering WORLD-BEAM QS18 Series Photoelectric Sensors offer a variety of sensing methods, including adjustable background suppression, expert opposed-mode with IO-link, mechanically adjustable foreground suppression, and clear-object detection.

Resultados: 601
Seleccionar Imagen N.° de pieza
 Fabricante:
Descripción Hoja de datos Disponibilidad Precio: (PEN) Filtre los resultados en la tabla por precio unitario en función de su cantidad.
Cantidad RoHS Modelo ECAD Método de detección
Distancia de detección
Fuente de luz
Configuración de salida
Método de conexión
Longitud del cable
Tipo de conector
Género del contacto
Número de clavijas
Voltaje de alimentación - Mín.
Voltaje de alimentación - Máx.
Temperatura de trabajo mínima
Temperatura de trabajo máxima
Banner Engineering Sensores fotoeléctricos WORLD-BEAM QS18 Series: Emitter (Flush Front); Range: 3 m; Input: 10-30 V dc; Output: Not Applicable; 150 mm (6 in) 12 Pigtail QD
Hoja de datos
5En existencias
Min.: 1
Mult.: 1
Opposed Emitter 3 m Infrared LED Cable with Connector 150 mm M12 Pin 4 Pin 10 VDC 30 VDC - 20 C + 70 C
Banner Engineering Sensores fotoeléctricos WORLD-BEAM QS18 Series: Emitter (Flush Front); Range: 3 m; Input: 10-30 V dc; Output: Not Applicable; M12 Integral QD
Hoja de datos
3En existencias
4Se espera el 23/02/2026
Min.: 1
Mult.: 1
Opposed Emitter 3 m Infrared LED Connector M12 Pin 4 Pin 10 VDC 30 VDC - 20 C + 70 C
Banner Engineering Sensores fotoeléctricos WORLD-BEAM QS18 Series: Emitter; Range: 20 m; Input: 10-30 V dc; Output: Not Applicable; 150 mm (6 in) M8 Pigtail QD
Hoja de datos
5En existencias
Min.: 1
Mult.: 1
Opposed Emitter 20 m Infrared LED Cable with Connector 150 mm M8 Pin 4 Pin 10 VDC 30 VDC - 20 C + 70 C
Banner Engineering Sensores fotoeléctricos WORLD-BEAM QS18 Series: Emitter; Range: 20 m; Input: 10-30 V dc; Output: Not Applicable; 150 mm (6 in) M12 Pigtail QD
Hoja de datos
8En existencias
Min.: 1
Mult.: 1
Opposed Emitter 20 m Infrared LED Cable with Connector 150 mm M12 Pin 4 Pin 10 VDC 30 VDC - 20 C + 70 C
Banner Engineering Sensores fotoeléctricos WORLD-BEAM QS18 Series: Emitter; Range: 20 m; Input: 10-30 V dc; Output: Not Applicable; M12 Integral QD
Hoja de datos
18En existencias
Min.: 1
Mult.: 1
Opposed Emitter 20 m Infrared LED Connector M12 Pin 4 Pin 10 VDC 30 VDC - 20 C + 70 C
Banner Engineering Sensores fotoeléctricos WORLD-BEAM QS18 Series: Visible Red Emitter; Range: 20 m; Input: 10-30 V dc; Output: Not Applicable; 2 m (6.5 ft) Cable
Hoja de datos
3En existencias
Min.: 1
Mult.: 1
Opposed Emitter 20 m Red LED Cable 2 m 10 VDC 30 VDC - 20 C + 70 C
Banner Engineering Sensores fotoeléctricos WORLD-BEAM QS18 Series: Laser Class 1; Cross; Range: 15 m; Input: 10-30 V dc; Output: Not Applicable; 2 m Cable
Hoja de datos
1En existencias
Min.: 1
Mult.: 1
Opposed Emitter 15 m Red Laser Cable 2 m 10 VDC 30 VDC - 10 C + 50 C
Banner Engineering Sensores fotoeléctricos WORLD-BEAM QS18 Series: Laser Class 1; Range: 30 m; Input: 10-30 V dc; Output: Not Applicable; 150 mm (6 in) M12 Pigtail QD
Hoja de datos
6En existencias
Min.: 1
Mult.: 1
Opposed Emitter 30 m Red Laser Cable with Connector 150 mm M12 4 Pin 10 VDC 30 VDC - 10 C + 50 C
Banner Engineering Sensores fotoeléctricos WORLD-BEAM QS18 Series: Laser Class 1; Range: 30 m; Input: 10-30 V dc; Output: Not Applicable; 4-pin M12 Integral QD
Hoja de datos
1En existencias
6Se espera el 23/03/2026
Min.: 1
Mult.: 1
Opposed Emitter 30 m Red Laser Connector M12 4 Pin 10 VDC 30 VDC - 10 C + 50 C
Banner Engineering Sensores fotoeléctricos WORLD-BEAM: Adjustable Field Background Suppression; Cutoff Adjustment Range: 30 to 300 mm; Input: 10-30 V dc; Outputs: Bipolar NPN and PNP Light Operate; 150 mm (6 in) M12 Pigtail QD
Hoja de datos
3En existencias
Min.: 1
Mult.: 1
Background Suppression 30 mm to 300 mm Red LED NPN/PNP-LO Cable with Connector 150 mm M12 Pin 4 Pin 10 VDC 30 VDC - 20 C + 55 C
Banner Engineering Sensores fotoeléctricos WORLD-BEAM QS18 Universal Volt; Diffuse Visible R; Range:450 mm; Input: 20-140 V ac/dc; Output: LO; P-MOSFET (Sourcing); 2 m (6.5 ft) Cable
Hoja de datos
3En existencias
Min.: 1
Mult.: 1
Diffuse 450 mm Red LED P-MOSFET-LO Cable 2 m 20 VAC/DC 140 VAC/DC - 25 C + 70 C
Banner Engineering Sensores fotoeléctricos WORLD-BEAM QS18 Universal Volt; Polar Retro Visble; Range: 3.5 m; Input: 20-140 V ac/dc; Output: LO; P-MOSFET (Sourcing); 150 mm (6 in) Micro Pigtail QD
Hoja de datos
2En existencias
Min.: 1
Mult.: 1
Retroreflective 3.5 m Red LED P-MOSFET-LO Cable with Connector 150 mm Micro AC 4 Pin 20 VAC/DC 140 VAC/DC - 25 C + 70 C
Banner Engineering Sensores fotoeléctricos WORLD-BEAM QS18 Expert Series: Diffuse; Range: 600 mm; Input: 10-30 V dc; Output 1: Push/Pull with IO-Link; Output 2: Configurable PNP/NPN; 150 mm (6 in) M12 Pigtail QD
Hoja de datos
1En existencias
Min.: 1
Mult.: 1
Diffuse 600 mm Infrared LED NPN/PNP/Push-Pull Cable with Connector 150 mm M12 4 Pin 10 VDC 30 VDC - 40 C + 70 C
Banner Engineering Sensores fotoeléctricos WORLD-BEAM QS18 Expert Series: Diffuse; Range: 800 mm; Input: 10-30 V dc; Output: Complementary Solid-State NPN; 4-pin M12 Integral QD
Hoja de datos
3En existencias
Min.: 1
Mult.: 1
Diffuse 800 mm Infrared LED NPN-LO/DO Connector M12 4 Pin 10 VDC 30 VDC - 20 C + 70 C
Banner Engineering Sensores fotoeléctricos QS18 Expert Series Clear Object Sensor; Range: 3000 mm; Input: 10-30 V dc; Output: NPN; 2 m (6.5 ft) Cable
Hoja de datos
1En existencias
Min.: 1
Mult.: 1
Retroreflective 3 m Red LED NPN Cable 2 m 10 VDC 30 VDC - 40 C + 70 C
Banner Engineering Sensores fotoeléctricos WORLD-BEAM QS18 Expert Series: Convergent; Focal Point 43 mm; Input: 10-30 V dc; Output: Convergent; M12 Integral QD
Hoja de datos
1En existencias
Min.: 1
Mult.: 1
Limited Reflective 43 mm Red LED PNP-LO/DO Connector M12 4 Pin 10 VDC 30 VDC - 20 C + 70 C
Banner Engineering Sensores fotoeléctricos WORLD-BEAM QS18 Expert Series: Diffuse; Range: 800 mm; Input: 10-30 V dc; Output: Complementary Solid-State PNP; 150 mm (6 in) 4-pin M12 Pigtail QD
Hoja de datos
2En existencias
Min.: 1
Mult.: 1
Diffuse 800 mm Infrared LED PNP-LO/DO Cable with Connector 150 mm M12 4 Pin 10 VDC 30 VDC - 20 C + 70 C
Banner Engineering Sensores fotoeléctricos WORLD-BEAM QS18 Expert Series: Diffuse; Range: 800 mm; Input: 10-30 V dc; Output: Complementary Solid-State PNP; M12 Integral QD
Hoja de datos
8En existencias
Min.: 1
Mult.: 1
Diffuse 800 mm Infrared LED PNP-LO/DO Connector M12 4 Pin 10 VDC 30 VDC - 20 C + 70 C
Banner Engineering Sensores fotoeléctricos WORLD-BEAM QS18 Expert Series; Diffuse; Range: 600 mm; Input: 10-30 V dc; Output: PNP; 2 m Cable
Hoja de datos
2En existencias
Min.: 1
Mult.: 1
Diffuse 600 mm Red LED PNP-LO/DO Cable 2 m 10 VDC 30 VDC - 20 C + 70 C
Banner Engineering Sensores fotoeléctricos WORLD-BEAM QS18 Expert Series; Diffuse; Range: 600 mm; Input: 10-30 V dc; Output: PNP; 4-pin M12 Integral QD
Hoja de datos
5En existencias
Min.: 1
Mult.: 1
Diffuse 600 mm Red LED PNP-LO/DO Connector M12 4 Pin 10 VDC 30 VDC - 20 C + 70 C
Banner Engineering Sensores fotoeléctricos WORLD-BEAM QS18 Expert Series: Polar Retro; Range: 3.5 m; Input: 10-30 V dc; Output: Complementary Solid-State PNP; 150 mm (6 in) M12 Pigtail QD
Hoja de datos
2En existencias
Min.: 1
Mult.: 1
Retroreflective 3.5 m Red LED PNP-LO/DO Cable with Connector 150 mm M12 4 Pin 10 VDC 30 VDC - 20 C + 70 C
Banner Engineering Sensores fotoeléctricos QS18 Expert Series Clear Object Sensor; Range: 3000 mm; Input: 10-30 V dc; Output: PNP; 150 mm (6 in) M12 Pigtail QD
Hoja de datos
1En existencias
Min.: 1
Mult.: 1
Retroreflective 3 m Red LED PNP Cable with Connector 150 mm M12 4 Pin 10 VDC 30 VDC - 40 C + 70 C
Banner Engineering Sensores fotoeléctricos WORLD-BEAM: Adjustable Field; Range: 250 mm; Input: 10-30 V dc; Output 1: Push/Pull with IO-Link; Output 2: Configurable PNP/NPN ; M12 Integral QD
Hoja de datos
1En existencias
Min.: 1
Mult.: 1
Background Suppression 30 mm to 250 mm Red LED NPN/PNP Connector M12 4 Pin 10 VDC 30 VDC - 40 C + 60 C
Banner Engineering Sensores fotoeléctricos WORLD-BEAM: Adjustable Field; Range: 1-100 mm Adj Cutoff: 20-100 mm; Input: 10-30 V dc; Outputs: Complementary NPN; 150 mm (6 in) M12 Pigtail QD
Hoja de datos
1En existencias
Min.: 1
Mult.: 1
Background Suppression 20 mm to 100 mm Red LED Complementary NPN-LO/DO Cable with Connector 150 mm M12 Pin 4 Pin 10 VDC 30 VDC - 10 C + 50 C
Banner Engineering Sensores fotoeléctricos WORLD-BEAM: Adjustable Field Background Suppression; Cutoff Adjustment Range: 30 to 300 mm; Input: 10-30 V dc; Outputs: Complementary NPN; 2 m (6.5 ft) Cable
Hoja de datos
5En existencias
Min.: 1
Mult.: 1
Background Suppression 30 mm to 300 mm Red LED NPN Cable 2 m 10 VDC 30 VDC - 20 C + 55 C