BGSA400ML10E6327XTSA1

Infineon Technologies
726-BGSA400ML10E6327
BGSA400ML10E6327XTSA1

Fabricante:

Descripción:
Circuitos integrados de interruptores de RF ANTENNA DEVICES

Modelo ECAD:
Descargue Library Loader gratis para convertir este archivo para su herramienta ECAD. Conozca más sobre el modelo ECAD.

En existencias: 7,005

Existencias:
7,005 Se puede enviar inmediatamente
Plazo de entrega de fábrica:
12 Semanas Tiempo estimado de producción de fábrica para cantidades superiores a las que se muestran.
Mínimo: 1   Múltiples: 1
Precio unitario:
S/-.--
Precio ext.:
S/-.--
Est. Tarifa:

Precio (PEN)

Cantidad Precio unitario
Precio ext.
S/2.45 S/2.45
S/2.12 S/21.20
S/2.00 S/50.00
S/1.83 S/183.00
S/1.73 S/432.50
S/1.65 S/825.00
S/1.49 S/1,490.00
S/1.28 S/5,120.00
Envase tipo carrete completo (pedir en múltiplos de 7500)
S/1.11 S/8,325.00

Atributo del producto Valor de atributo Seleccionar atributo
Infineon
Categoría de producto: Circuitos integrados de interruptores de RF
RoHS:  
SPST
SMD/SMT
TSLP-10-3
BGSA400ML10
Reel
Cut Tape
Marca: Infineon Technologies
Número de interruptores: Quad
Tipo de producto: RF Switch ICs
Cantidad de empaque de fábrica: 7500
Subcategoría: Wireless & RF Integrated Circuits
Alias de las piezas n.º: BGSA 400ML10 E6327 SP005410271
Productos encontrados:
Para mostrar productos similares, seleccione al menos una casilla de verificación
Seleccione al menos una de las casillas de verificación anteriores para mostrar productos similares en esta categoría.
Atributos seleccionados: 0

CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
MXHTS:
8542399999
ECCN:
5A991.g

Antenna Centric Devices

Infineon Technologies Antenna Centric Devices significantly improve data rate for mobile cellular devices while minimizing power consumption. Modern 3G/4G smartphones need to cover a wide frequency range, while the multiband antennas need to be minimized in dimensions. Infineon antenna centric devices optimize antenna performance in the required frequency bands to improve reception of weak signals and radiate efficiency. This indirectly lowers current consumption from power amplifiers. Antenna-centric devices are designed to address various tuning concepts, supporting a large variation of antenna impedance with very low RON values and high voltage handling capabilities. Infineon antenna-centric devices are available with both GPIO (General Purpose Input/ Output) and the standardized MIPI RFFE (Mobile Industry Processor Interface for RF Front-End) interface.

BGSA400ML10 Ultra High RF Antenna Tuning Switch

Infineon Technologies BGSA400ML10 Ultra High RF Antenna Tuning Switch is a versatile shunt to ground 4x Single-Pole Single-Throw (4xSPST) Switch optimized for low COFF and low RON applications up to 7.125GHz. The BGSA400ML10 integrates on-chip CMOS logic and power supply regulation. The digital control interface of the BGSA400ML10 is compliant with MIPI2.1 RFFE specifications. Each switch throw can be programmed individually or all together in the same RFFE command frame. Up to four of the same device can be controlled using the same RFFE bus thanks to the unique USID_SEL pin feature.

Antenna Tuner RF Switch ICs

Infineon Technologies Antenna Tuner RF Switch ICs improve antenna radiation efficiency while promoting higher data rates, longer battery life, and improved signal quality. Antenna tuning can be performed in two ways: aperture tuning shifts the natural resonance of an antenna to the necessary operating frequency band, while impedance tuning optimizes signal transmission to the antenna by compensating frequency and environmental effects. The Infineon Technologies Antenna Tuner RF Switch ICs address antenna design challenges while enabling maximum power transfer, delivering the desired antenna efficiency.