MAX25561ATJ/V+

Analog Devices / Maxim Integrated
700-MAX25561ATJ/V+
MAX25561ATJ/V+

Fabricante:

Descripción:
IC de controladores de iluminación LED 6-Channel 220mA Backlight Driver

Modelo ECAD:
Descargue Library Loader gratis para convertir este archivo para su herramienta ECAD. Conozca más sobre el modelo ECAD.

Atributo del producto Valor de atributo Seleccionar atributo
Analog Devices Inc.
Categoría de producto: IC de controladores de iluminación LED
RoHS:  
1 Output
Boost
220 mA
TQFN-32
36 V
4.5 V
400 kHz to 2.2 MHz
1.8 V, 5 V
MAX25561
- 40 C
+ 125 C
Tray
Marca: Analog Devices / Maxim Integrated
Reducción de luminosidad: PWM
Voltaje de entrada: 4.5 V to 36 V
Estilo de montaje: SMD/SMT
Número de canales: 6 Channel
Dp - Disipación de potencia : 2.222 W
Producto: LED Backlight Drivers
Tipo de producto: LED Lighting Drivers
Cantidad de empaque de fábrica: 490
Subcategoría: Driver ICs
Corriente de suministro - Máx.: 3 mA
Tipo: LED Backlight Driver
Productos encontrados:
Para mostrar productos similares, seleccione al menos una casilla de verificación
Seleccione al menos una de las casillas de verificación anteriores para mostrar productos similares en esta categoría.
Atributos seleccionados: 0

Esta funcionalidad requiere que JavaScript esté habilitado.

Códigos de cumplimiento
CAHTS:
8542310000
USHTS:
8542310030
ECCN:
EAR99
Clasificaciones de origen
País de origen:
Taiwán
País de origen del ensamblaje:
No disponible
País de difusión:
No disponible
El país está sujeto a cambios en el momento del envío.

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

MAX25561 ASIL B LED Backlight Drivers

Analog Devices Inc. MAX25561 ASIL B LED Backlight Drivers are 6-channel devices with an integrated current-mode boost controller that operates over a switching frequency range of 400kHz to 2.2MHz and incorporates a spread spectrum. Selectable phase-shifting of the output channels is included to reduce EMI. The TQFN packaged MAX25561 provides up to 220mA per channel and operates within a -40°C to +125°C temperature range. The Analog Devices MAX25561 can operate down to very low battery voltages by a unique input voltage switching scheme. Extensive diagnostics and an I2C interface are included to assist with system ASIL B compliance.

En existencias: 472

Existencias:
472 Se puede enviar inmediatamente
Las cantidades superiores a 472 estarán sujetas a requisitos mínimos de pedido.
Mínimo: 1   Múltiples: 1   Máxima: 472
Precio unitario:
S/-.--
Precio ext.:
S/-.--
Est. Tarifa:

Precio (PEN)

Cantidad Precio unitario
Precio ext.
S/27.48 S/27.48
S/21.14 S/211.40
S/19.54 S/488.50
S/18.37 S/1,837.00
S/17.05 S/4,262.50