FPF2595UCX

onsemi
512-FPF2595UCX
FPF2595UCX

Fabricante:

Descripción:
Circuitos integrados de interruptor de alimentación - Distribución de alimentación Load Switch w/ Adj Current Limit Cntrl

Hoja de datos:
Modelo ECAD:
Descargue Library Loader gratis para convertir este archivo para su herramienta ECAD. Conozca más sobre el modelo ECAD.
Más información
Conozca más sobre onsemi FPF2595UCX

En existencias: 12,508

Existencias:
12,508 Se puede enviar inmediatamente
Plazo de entrega de fábrica:
26 Semanas Tiempo estimado de producción de fábrica para cantidades superiores a las que se muestran.
Mínimo: 1   Múltiples: 1
Precio unitario:
S/-.--
Precio ext.:
S/-.--
Est. Tarifa:
Empaque:
Envase tipo carrete completo (pedir en múltiplos de 3000)

Precio (PEN)

Cantidad Precio unitario
Precio ext.
Cinta cortada / MouseReel™ †
S/4.20 S/4.20
S/3.04 S/30.40
S/2.75 S/68.75
S/2.43 S/243.00
S/2.27 S/567.50
S/2.18 S/1,090.00
S/2.01 S/2,010.00
Envase tipo carrete completo (pedir en múltiplos de 3000)
S/1.96 S/5,880.00
S/1.93 S/11,580.00
† S/23.00 Se agregará y calculará la tarifa de MouseReel™ en su carrito de compras. Ningún artículo de MouseReel™ se puede cancelar ni devolver. ↩

Atributo del producto Valor de atributo Seleccionar atributo
onsemi
Categoría de producto: Circuitos integrados de interruptor de alimentación - Distribución de alimentación
RoHS:  
Load Switch
1 Output
3.9 A
1 A
50 mOhms
1.46 ms
230 us
2.5 V to 5.5 V
- 40 C
+ 85 C
SMD/SMT
WLCSP-12
FPF2595
Reel
Cut Tape
MouseReel
Marca: onsemi
Dp - Disipación de potencia : 1.48 W
Producto: Load Switches
Tipo de producto: Power Switch ICs - Power Distribution
Cantidad de empaque de fábrica: 3000
Subcategoría: Switch ICs
Voltaje de alimentación - Máx.: 5.5 V
Voltaje de alimentación - Mín.: 2.5 V
Peso de la unidad: 74 g
Productos encontrados:
Para mostrar productos similares, seleccione al menos una casilla de verificación
Seleccione al menos una de las casillas de verificación anteriores para mostrar productos similares en esta categoría.
Atributos seleccionados: 0

CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390070
JPHTS:
854239099
TARIC:
8542399000
MXHTS:
8542399901
ECCN:
EAR99

FPF2595 IntelliMAX™ Load Switch

onsemi FPF2595 IntelliMAX™ Overvoltage, Overcurrent Protection Load Switch is an advanced load-management switch for applications requiring a highly integrated solution. The FPF2595 disconnects load powered from the <6VDC power rail with stringent off-state current targets and high load capacitances (<100uF). The FPF2595 features a slew-rate controlled low-impedance MOSFET switch (35mΩ typical) and integrated analog features. The slew-rate controlled turn-on feature prevents inrush current and the resulting excessive voltage droop on power rails. onsemi FPF2595 also offers over-voltage protection and over-temperature protection. FPF2595's true reverse-current blocking (TRCB) function obstructs unwanted reverse current from VOUT to VIN during ON and OFF states. The device's extremely low off-state current drain of <2µA maximum facilitates compliance with standby power requirements. A logic input (active HIGH), capable of interfacing directly with low-voltage control signal / general-purpose input/output (GPIO) without an external pull-down resistor, manages switch control. With an input voltage range of 2.5VDC to 5.5VDC, FPF2595 supports a large range of consumer, medical, optical, portable, storage, and industrial-device power management applications.

IntelliMAX™ Advanced Load Management Switches

onsemi IntelliMAX™ Advanced Load Management Switches help designers increase system protection and reduce complexity in designs while achieving greater system power and reliability. The FPF1039 series demonstrates low shutdown current drain to help facilitate compliance in low-standby power applications. The FPF1320 and FPF1321 switches perform seamless power-source transitions between two input power rails using the SEL pin with the advanced break-before-make operation. onsemi IntelliMAX Advanced Load Management Switches are ideal for smart devices and portable storage devices that require a high current capability and low ON-resistance solution for power path management.

FPF2x Over Current Protected Switches

onsemi FPF2x Over-Current Protected Switches prevent excessive current and trigger one of three fault conditions. Auto restart will automatically shut down the part and attempt to restart at the defined "auto restart time" interval until the fault is cleared. The Shutdown feature automatically shuts down the part and requires a power cycle on the "ON" pin to clear the fault. The Constant Current feature limits the current to a fixed or user-defined value.

Protection & Small Signal Discretes

onsemi Protection & Small Signal Discretes are a portfolio of over 8000 discretes available in 176 packages. The portfolio features high performance small signal Schottky in the industry's smallest form factor. Standard & automotive small signal products are available.

USB Type-C™ Solutions

USB Type-C is not only replacing older USB standards but also other standards like Thunderbolt and DisplayPort. It enables higher performance and simplicity for designers and manufacturers. onsemi offers a range of quality products that can be designed into this solution for USB Power Delivery.

Se ha producido un error inesperado.


¿Tiene alguna pregunta? Visite el Centro de ayuda.
Si tiene preguntas sobre un pedido específico, inicie sesión en su cuenta.

Si tiene más problemas, comuníquese con nosotros al 800-346-6873 o envíe un correo electrónico a help@mouser.com.