Todos los resultados (1,203)

A continuación, seleccione una categoría para ver las opciones de filtrado y reducir su búsqueda.
Seleccionar Imagen N.° de pieza
 Fabricante:
Descripción Hoja de datos Disponibilidad Precio: (PEN) Filtre los resultados en la tabla por precio unitario en función de su cantidad.
Cantidad RoHS
Marki Microwave Amplificador de RF The ADM-8350PSM is a high-linearity, low noise amplifier capable of providing +22 dBm output power up to 6 GHz. The ADM-8350PSM can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
Hoja de datos
10Se espera el 23/02/2026
Min.: 1
Mult.: 1

Marki Microwave Acondicionamiento de señales The BTM-0026PSM-2 is a packaged miniature bias tee featuring excellent 0.4 dB insertion loss and superior 25 dB isolations over a broad 10 MHz to 26 GHz bandwidth. The BTM-0026PSM-2 works well for K-Band applications.
Hoja de datos
25Se espera el 10/04/2026
Min.: 1
Mult.: 1

Marki Microwave Acondicionamiento de señales A high-power GaAs Schottky diode signal limiter featuring high IP3 over a broad DC-10GHz bandwidth. It offers low insertion loss and excellent return loss from DC through X band and has a typical 1 dB compression point of 11 dBm.
Hoja de datos
25Se espera el 20/03/2026
Min.: 1
Mult.: 1

Marki Microwave Ecualizadores The MEQ6-7ASM passive MMIC equalizer QFN is an ideal solution for compensating for low pass filtering effects in RF/microwave and high speed digital systems, providing positive slope from DC to 7GHz with DC attenuation options between 3 and 12dB.
Hoja de datos
25Se espera el 6/03/2026
Min.: 1
Mult.: 1

Marki Microwave Ecualizadores The MEQ7-20ASM passive MMIC equalizer QFN is an ideal solution for compensating for low pass filtering effects in RF/microwave and high speed digital systems, providing positive slope from DC to 20GHz with DC attenuation options between 0 and 11dB.
Hoja de datos
25Se espera el 23/02/2026
Min.: 1
Mult.: 1

Marki Microwave Acondicionamiento de señales The MMD-0415HPSM is a MMIC doubler fabricated with GaAs Schottky diodes. This part operates over a 2 to 7.5 GHz input frequency range or a doubled output frequency range of 4 to 15 GHz.
Hoja de datos
25Se espera el 22/05/2026
Min.: 1
Mult.: 1

Marki Microwave Acondicionamiento de señales The MPD-0108FCSP2 is a small footprint MMIC 1-8 GHz 2-Way power divider/power splitter featuring high 23 dB isolation and low 0.8 dB insertion loss in our compact CSP2 chip scale package.
Hoja de datos
25Se espera el 23/02/2026
Min.: 1
Mult.: 1

Marki Microwave Acondicionamiento de señales The MPD-0108SCSP2 is a small footprint MMIC 1-8 GHz 2-Way power divider/power splitter featuring high 23 dB isolation and low 0.9 dB insertion loss in our compact CSP2 chip scale package.
Hoja de datos
25Se espera el 23/02/2026
Min.: 1
Mult.: 1

Marki Microwave Acondicionamiento de señales The MPD-0422FCSP2 is a small footprint MMIC 4-22 GHz 2-Way power divider/power splitter featuring high 24 dB isolation and low 0.7 dB insertion loss in our compact CSP2 chip scale package.
Hoja de datos
25Se espera el 23/02/2026
Min.: 1
Mult.: 1

Marki Microwave Acondicionamiento de señales The MPD-0422SCSP2 is a small footprint MMIC 4-22 GHz 2-Way power divider/power splitter featuring high 22 dB isolation and low 0.9 dB insertion loss in our compact CSP2 chip scale package.
Hoja de datos
25Se espera el 23/02/2026
Min.: 1
Mult.: 1

Marki Microwave Acondicionamiento de señales The MPD-0R402SCSP2 is a small footprint MMIC 0.4-2.5 GHz 2-Way power divider/power splitter featuring high 20 dB isolation and low 1 dB insertion loss in our compact CSP2 chip scale package.
Hoja de datos
25Se espera el 23/02/2026
Min.: 1
Mult.: 1

Marki Microwave Acondicionamiento de señales The MPD4-0108CSP2 is a small footprint MMIC 1-8 GHz 4-Way power divider/power splitter featuring high 30 dB isolation and low 2.6 dB insertion loss in our compact CSP2 chip scale package.
Hoja de datos
25Se espera el 20/02/2026
Min.: 1
Mult.: 1

Marki Microwave Acondicionamiento de señales The MPD4-0R404CSP2 is a small footprint MMIC 0.4-4 GHz 4-Way power divider/power splitter featuring high 20 dB isolation and 3.4 dB insertion loss in our compact CSP2 chip scale package.
Hoja de datos
25Se espera el 23/02/2026
Min.: 1
Mult.: 1

Marki Microwave Acondicionamiento de señales A resistive 2-way power divider that features broadband operation from DC to 20 GHz. Resistive power dividers offer 6 dB nominal insertion loss and excellent amplitude and phase balance.
Hoja de datos
2Se espera el 23/02/2026
Min.: 1
Mult.: 1

Marki Microwave Acondicionamiento de señales 2-Way Wilkinson power dividers can be used for both in-phase power splitting and power combining applications.
Hoja de datos
10Se espera el 24/02/2026
Min.: 1
Mult.: 1
Marki Microwave Acondicionamiento de señales A broadband MMIC LO buffer amplifier that is capable of producing at least +18 dBm up to 67 GHz. This amplifier can be used to drive L- or H-diode mixers from 35-67 GHz, or L- or H-diode IQ mixers from 35-60 GHz.
Hoja de datos
Plazo de entrega no en existencias 12 Semanas
Min.: 1
Mult.: 1

Marki Microwave Acondicionamiento de señales The ABDS-10170PSM is a GaAs active MMIC balun in a 3mm QFN surface mount package. It offers 3 dB differential to single ended gain from low frequencies (limited by DC block) to 30 GHz.
Hoja de datos
Plazo de entrega no en existencias 10 Semanas
Min.: 25
Mult.: 25

Marki Microwave Acondicionamiento de señales The ABSD-10168PSM is a GaAs active MMIC balun in a 3mm QFN surface mount package. Its frequency ranges from DC to 30 GHz and offers 3 dB single ended to differential gain (low end limited by DC block).
Hoja de datos
Plazo de entrega no en existencias 10 Semanas
Min.: 25
Mult.: 25

Marki Microwave Acondicionamiento de señales The ABSD-10169PSM is a GaAs active MMIC balun in a 3mm QFN surface mount package. Its frequency ranges from DC to 30 GHz and offers 9 dB single ended to differential gain (low end limited by DC block).
Hoja de datos
Plazo de entrega no en existencias 10 Semanas
Min.: 25
Mult.: 25

Marki Microwave Acondicionamiento de señales The ADA-1030 can be used as a frequency extender to enhance the frequency range of a <15 GHz synthesizer up to 30 GHz. Useful for lab testing, test and measurement, and prototype systems.
Hoja de datos
Plazo de entrega no en existencias 12 Semanas
Min.: 1
Mult.: 1

Marki Microwave Amplificador de RF A small, low power, and economical T3 driver or T3A pre-amplifier. It is a GaAs PHEMT distributed amplifier in a 3mm QFN surface mount package.
Hoja de datos
Plazo de entrega no en existencias 10 Semanas
Min.: 25
Mult.: 25

Marki Microwave Acondicionamiento de señales The ADM-8344 is a wideband distributed low noise amplifier capable of providing 18 dB gain and +27 dBm OIP3 from DC to 18 GHz and a low 1.4 dB typical noise figure from 4 to 7 GHz.
Hoja de datos
Plazo de entrega no en existencias 12 Semanas
Min.: 1
Mult.: 1

Marki Microwave Amplificador de RF A wideband distributed low noise amplifier capable of providing 19 dB gain and +29 dBm OIP3 from DC to 18 GHz and a low 1.7 dB typical noise figure from 4 to 14 GHz.ADM-8344 is available A 4mm QFN and can be supplied from a single positive bias.
Hoja de datos
Plazo de entrega no en existencias 10 Semanas
Min.: 25
Mult.: 25

Marki Microwave Amplificador de RF The ADM-8475PSM is a high-linearity, low noise amplifier capable of providing 13 dB gain, +26 dBm OIP3 and 2 dB noise figure across a broad 0.5-18 GHz bandwidth.
Hoja de datos
Plazo de entrega no en existencias 10 Semanas
Min.: 25
Mult.: 25

Marki Microwave Amplificador de RF The ADM-8536PSM is one of the world's smallest 2-20 GHz high linearity, low noise amplifier solution, featuring 10.5 dB gain, +25 dBm OIP3 and 2.5 dB noise figure, making it suitable for use in RF front-ends.
Hoja de datos
Plazo de entrega no en existencias 10 Semanas
Min.: 25
Mult.: 25