Todos los resultados (1,704)

A continuación, seleccione una categoría para ver las opciones de filtrado y reducir su búsqueda.

Herramientas y suministros
Clasificar pedido:
Categorías clasificadas por cantidad de resultados.

Soluciones incluidas
Clasificar pedido:
Categorías clasificadas por cantidad de resultados.

Automatización industrial
Clasificar pedido:
Categorías clasificadas por cantidad de resultados.

Componentes pasivos

Sensores
Clasificar pedido:
Categorías clasificadas por cantidad de resultados.

Cables y alambres
Clasificar pedido:
Categorías clasificadas por cantidad de resultados.

Conectores
Clasificar pedido:
Categorías clasificadas por cantidad de resultados.

Dispositivos optoelectrónicos
Clasificar pedido:
Categorías clasificadas por cantidad de resultados.

Electromecánica
Clasificar pedido:
Categorías clasificadas por cantidad de resultados.

Semiconductores
Clasificar pedido:
Categorías clasificadas por cantidad de resultados.

Gabinetes

Potencia

Prueba y medición
Clasificar pedido:
Categorías clasificadas por cantidad de resultados.

Administración térmica

Sin clasificar
Seleccionar Imagen N.° de pieza
 Fabricante:
Descripción Hoja de datos Disponibilidad Precio: (PEN) Filtre los resultados en la tabla por precio unitario en función de su cantidad.
Cantidad RoHS
SparkFun Accesorios SparkFun Break Away Male Headers Right Angle 18En existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun This is a SparkFun exclusive! These are 12" long jumper wires terminated as male to male. Use these to jumper from any female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one pack of ten jumper 8En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a right-angle 24-pin Molex Mini-Fit Jr. connector commonly used as the power supply connector on ATX motherboards. Two rows of twelve pins are broken out two rows of through-hole male headers. See the datasheet below for pin spacing dime 32En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a 3-pin through-hole PH series JST connector. The pins are spaced by 2mm.We really like the solid locking feeling and high current rating on these small connectors. This connector mates with our 3-pin jumper wire and may be useful for inter 17En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST connector on one end bare cable on the opposite end. It also comes with the mating connector for the JST.
Hoja de datos
39En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun BNC connectors are ideal for quick connects to audio coax and high-frequency signal lines. This is a right-angle connector and comes with a lock washer and nut.Hookup / Related ProductSMA to BMC Male Cable RG316 - 1m
Hoja de datos
8En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Copper tape has countless applications in electronics from creating low-profile traces for electrical components to RF-shielding and antenna-making. Copper tape is even used to join things together using solder like the stained glass on Tiffany lamp 55En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun These are standard 0.1" spaced header pins that can be through-hole mounted. This header connects perfectly with most 6-pin male headers.This is a 6-Pin female header.Documents:Datasheet 96En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This black Mini Breadboard is a great way to prototype your small projects! With 170 tie points there's just enough room to build and test simple circuits; They're also great for breaking out DIP package ICs to jumper wires! If you run out of room n 9En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a 2x23 pin male PTH header. This piece is in the common configuration for Beaglebone Black headers that can be broken apart to form smaller header formations. Each pin has a spacing of 0.1" in between each other.Documents:Datasheet 36En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun You'll have no need for a screwdriver with this terminal! This is a 3-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A and will line up well with the standard 0.19" spacing. Please note that the pins are thick enough (1.20mm
Hoja de datos
20En existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun This is a piezoresistive force sensor from Tekscan. The harder you press the lower the sensor's resistance. Pressing hard the resistance changes from infinite to 300k. The sensor itself is thin and flexible but the resistance does not change whil 1En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is your basic spool of lead free solder with a water soluble resin core. 0.031" gauge and 100 grams. This is a good spool for more advanced users that should last 6-12 months depending on how often you solder. If you are just beginning to solde 3En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a USB to TTL Serial Cable which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this cable are configured to operate at 3.3V specifically with a Raspberry Pi with each serial pin broken apart. Thanks to its se 45En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Electrolytic decoupling capacitors 100uF/25V. These capacitors are great transient/surge suppressors. Attach one between the power and ground of your project to ensure smooth power delivery. High quality radial electrolytic capacitors. 20En existencias
100Se espera el 4/06/2026
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Ever hear of a thing called RGB? Red Green Blue? How about an RGB LED? These 5mm units have four pins - Cathode is the longest pin. One for each color and a common cathode. Use this one LED for three status indicators or pulse width modulate all th
Hoja de datos
47En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun LEDs - those blinky things. A must have for power indication pin status opto-electronic sensors and fun blinky displays.This is a very standard yellow LED. The lens is 3mm in diameter and it is diffused.Features:2.0-2.4VDC forward dropMax current 98En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun LEDs - those blinky things. A must have for power indication pin status opto-electronic sensors and fun blinky displays.This is a very basic 5mm LED with a green lens. It has a typical forward voltage of 2.0V and a rated forward current of 20mA.Fe 68En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a simple 3.5mm TRS stereo audio jack with a screw-on plastic shroud. These are great for projects that plug into headphone jacks. Stereo plugs can also be used for carrying serial comm connections! The outer shell unscrews to reveal solder te Plazo de entrega no en existencias 2 Semanas
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun LEDs - those blinky things. A must have for power indication pin status opto-electronic sensors and fun blinky displays.This is a very basic 5mm LED with a blue lens. It has a typical forward voltage of 3.4V and a rated forward current of 30mA.Fea 24En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Are you trying to make a quick dime from electronics? Why limit yourself to dimes? This coin acceptor will take up to 6 different kinds of coin! Whether you're building your own arcade cabinet or just charging admission to your house this programmab 3En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun It's your basic red action button! This is a very useful small panel-mount momentary switch. It is a SPST N.O. with the threaded portion being 6.75mm in diameter. This button is perfect for basic On/Off functions. Overall length (including leads) i 21En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun The FTDI cable is a USB to Serial (TTL level) converter which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this FTDI cable are configured to operate at 5V.The FTDI cable is designed around an FT232RQ which is hous 22En existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun This is a basic 16 character by 2 line display with a snazzy black background with white characters. Utilizes the extremely common HD44780 parallel interface chipset (datasheet). Interface code is freely available. You will need 11 general I/O pins
Hoja de datos
14En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Do you need *a lot *of space? But you need it in the size of your pinky nail? microSD (uSD) is here to save the day. TransFlash has now completed standards certification and is now known as microSD. Compatible with the SPI interface found on any SD c
Hoja de datos
32En existencias
Min.: 1
Mult.: 1