TPS2398DGK

Texas Instruments
595-TPS2398DGK
TPS2398DGK

Fabricante:

Descripción:
Controladores de voltaje intercambiables en caliente -48V Hot Swap Contro ller

Modelo ECAD:
Descargue Library Loader gratis para convertir este archivo para su herramienta ECAD. Conozca más sobre el modelo ECAD.

Disponibilidad

Existencias:
No en existencias
Plazo de entrega de fábrica:
6 Semanas Tiempo estimado de producción de fábrica.
Mínimo: 1   Múltiples: 1
Precio unitario:
S/-.--
Precio ext.:
S/-.--
Est. Tarifa:

Precio (PEN)

Cantidad Precio unitario
Precio ext.
S/13.97 S/13.97
S/10.55 S/105.50
S/8.87 S/221.75
S/8.45 S/676.00
S/8.14 S/1,953.60
S/7.94 S/4,446.40
S/7.40 S/7,696.00
S/7.16 S/18,329.60
S/7.05 S/35,532.00

Atributo del producto Valor de atributo Seleccionar atributo
Texas Instruments
Categoría de producto: Controladores de voltaje intercambiables en caliente
RoHS:  
Controllers & Switches
- 36 V
- 80 V
1 Channel
- 40 C
+ 85 C
SMD/SMT
VSSOP-8
Tube
Marca: Texas Instruments
País de ensamblaje: Not Available
País de difusión: Not Available
País de origen: TW
Kit de desarrollo: TPS2398EVM
Tensión de entrada / alimentación - Máx.: - 36 V
Tensión de entrada / alimentación - Mín.: - 80 V
Tipo de producto: Hot Swap Voltage Controllers
Serie: TPS2398
Cantidad de empaque de fábrica: 80
Subcategoría: PMIC - Power Management ICs
Peso de la unidad: 23.300 mg
Productos encontrados:
Para mostrar productos similares, seleccione al menos una casilla de verificación
Seleccione al menos una de las casillas de verificación anteriores para mostrar productos similares en esta categoría.
Atributos seleccionados: 0

Esta funcionalidad requiere que JavaScript esté habilitado.

CNHTS:
8542319000
CAHTS:
8542390000
USHTS:
8542390090
JPHTS:
8542390990
MXHTS:
8542330299
ECCN:
EAR99

LM5060 High-Side Protection Controllers

Texas Instruments LM5060 High-Side Protection Controllers with Low Quiescent Current offers intelligent control of a high-side N-channel MOSFET during normal on/off transitions and fault conditions. The constant rise time of the output voltage results from the inrush current control. Both an Input UVLO (with hysteresis) and a programmable input OVP are provided, with an enable input offering a remote on or off control. The initial start-up VGS fault detection delay time, the transition VDS fault detection delay time, and the continuous over-current VDS fault detection delay time is programmed from a single capacitor. The MOSFET is latched off until either the enable input, or the UVLO input is toggled low and then high when a detected fault condition persists longer than the allowed fault delay time.