LM5067MMX-2/NOPB

Texas Instruments
926-LM5067MMX-2/NOPB
LM5067MMX-2/NOPB

Fabricante:

Descripción:
Controladores de voltaje intercambiables en caliente -9-V to -80-V hot sw ap controller with A 926-LM5067MM-2/NOPB

Modelo ECAD:
Descargue Library Loader gratis para convertir este archivo para su herramienta ECAD. Conozca más sobre el modelo ECAD.

Disponibilidad

Existencias:
0

Aún puede comprar este producto que se encuentra pendiente.

Plazo de entrega de fábrica:
12 Semanas Tiempo estimado de producción de fábrica.
Mínimo: 1   Múltiples: 1
Precio unitario:
S/-.--
Precio ext.:
S/-.--
Est. Tarifa:
Empaque:
Envase tipo carrete completo (pedir en múltiplos de 3500)

Precio (PEN)

Cantidad Precio unitario
Precio ext.
Cinta cortada / MouseReel™
S/12.26 S/12.26
S/9.19 S/91.90
S/8.45 S/211.25
S/7.59 S/759.00
S/7.20 S/1,800.00
S/6.97 S/3,485.00
S/6.73 S/6,730.00
Envase tipo carrete completo (pedir en múltiplos de 3500)
S/5.96 S/20,860.00
S/5.92 S/41,440.00
† S/23.00 Se agregará y calculará la tarifa de MouseReel™ en su carrito de compras. Ningún artículo de MouseReel™ se puede cancelar ni devolver.

Embalaje alternativo

N.º de artículo del Fabricante:
Embalaje:
Reel, Cut Tape, MouseReel
Disponibilidad:
En existencias
Precio:
S/14.40
Mín.:
1

Producto similar

Texas Instruments LM5067MM-2/NOPB
Texas Instruments
Controladores de voltaje intercambiables en caliente Negative Hot Swap Co ntroller A 926-LM50 A 926-LM5067MMX-2/NOPB

Atributo del producto Valor de atributo Seleccionar atributo
Texas Instruments
Categoría de producto: Controladores de voltaje intercambiables en caliente
RoHS:  
Controllers & Switches
Adjustable
- 80 V
- 9 V
1 Channel
2 mA
- 40 C
+ 125 C
SMD/SMT
MSOP-10
Reel
Cut Tape
MouseReel
Yes
Marca: Texas Instruments
País de ensamblaje: Not Available
País de difusión: Not Available
País de origen: MY
Kit de desarrollo: LM5067EVAL
Tensión de entrada / alimentación - Máx.: - 9 V
Tensión de entrada / alimentación - Mín.: - 80 V
Tipo de producto: Hot Swap Voltage Controllers
Serie: LM5067
Cantidad de empaque de fábrica: 3500
Subcategoría: PMIC - Power Management ICs
Peso de la unidad: 30.800 mg
Productos encontrados:
Para mostrar productos similares, seleccione al menos una casilla de verificación
Seleccione al menos una de las casillas de verificación anteriores para mostrar productos similares en esta categoría.
Atributos seleccionados: 0

Esta funcionalidad requiere que JavaScript esté habilitado.

CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
JPHTS:
8542390990
TARIC:
8542399000
MXHTS:
85423999
ECCN:
EAR99

LM5067 Negative Hot Swap/Inrush Current Controller

Texas Instruments LM5067 Negative Hot-Swap/Inrush Current Controller is designed for intelligent control of the power supply connections during insertion and removal of circuit cards from a live system backplane or other “hot” power sources. The LM5067 also offers in-rush current control to limit system voltage droop and transients.

LM5060 High-Side Protection Controllers

Texas Instruments LM5060 High-Side Protection Controllers with Low Quiescent Current offers intelligent control of a high-side N-channel MOSFET during normal on/off transitions and fault conditions. The constant rise time of the output voltage results from the inrush current control. Both an Input UVLO (with hysteresis) and a programmable input OVP are provided, with an enable input offering a remote on or off control. The initial start-up VGS fault detection delay time, the transition VDS fault detection delay time, and the continuous over-current VDS fault detection delay time is programmed from a single capacitor. The MOSFET is latched off until either the enable input, or the UVLO input is toggled low and then high when a detected fault condition persists longer than the allowed fault delay time.