INA381A4IDGSR

Texas Instruments
595-INA381A4IDGSR
INA381A4IDGSR

Fabricante:

Descripción:
Amplificadores de detección de corriente 26-V 350-kHz curren t sense amplifier wi A 595-INA381A4IDGST

Modelo ECAD:
Descargue Library Loader gratis para convertir este archivo para su herramienta ECAD. Conozca más sobre el modelo ECAD.

En existencias: 2,516

Existencias:
2,516 Se puede enviar inmediatamente
Plazo de entrega de fábrica:
6 Semanas Tiempo estimado de producción de fábrica para cantidades superiores a las que se muestran.
Mínimo: 1   Múltiples: 1
Precio unitario:
S/-.--
Precio ext.:
S/-.--
Est. Tarifa:
Empaque:
Envase tipo carrete completo (pedir en múltiplos de 2500)

Precio (PEN)

Cantidad Precio unitario
Precio ext.
Cinta cortada / MouseReel™
S/2.76 S/2.76
S/1.98 S/19.80
S/1.78 S/44.50
S/1.56 S/156.00
S/1.45 S/362.50
S/1.39 S/695.00
S/1.34 S/1,340.00
Envase tipo carrete completo (pedir en múltiplos de 2500)
S/1.19 S/2,975.00
† S/23.00 Se agregará y calculará la tarifa de MouseReel™ en su carrito de compras. Ningún artículo de MouseReel™ se puede cancelar ni devolver.

Embalaje alternativo

N.º de artículo del Fabricante:
Embalaje:
Reel, Cut Tape, MouseReel
Disponibilidad:
En existencias
Precio:
S/4.59
Mín.:
1

Producto similar

Texas Instruments INA381A4IDGST
Texas Instruments
Amplificadores de detección de corriente 26-V, 350-kHz current sense amplifier with integrated over-current comparator 10-VSSOP -40 to 125
Fin de vida útil: Se encuentra obsoleto y será discontinuado por el fabricante.

Atributo del producto Valor de atributo Seleccionar atributo
Texas Instruments
Categoría de producto: Amplificadores de detección de corriente
RoHS:  
INA381
1 Channel
105 kHz
26 V
100 dB
80 uA
100 uV
5.5 V
2.7 V
350 uA
0.1 %
- 40 C
+ 125 C
SMD/SMT
VSSOP-10
Reel
Cut Tape
MouseReel
Ancho de banda de 3 dB: 105 kHz
Marca: Texas Instruments
País de ensamblaje: CN
País de difusión: JP
País de origen: CN
en - Densidad de sonido de tensión de entrada: 40 nV/sqrt Hz
V/V en ganancia: 200 V/V
Ios - Tensión offset de entrada: 50 nA
Sensibles a la humedad: Yes
Producto: Current Sense Amplifiers
Tipo de producto: Current Sense Amplifiers
Apagado: No Shutdown
VP - Velocidad de precesión: 2 V/us
Cantidad de empaque de fábrica: 2500
Subcategoría: Amplifier ICs
Peso de la unidad: 33 mg
Productos encontrados:
Para mostrar productos similares, seleccione al menos una casilla de verificación
Seleccione al menos una de las casillas de verificación anteriores para mostrar productos similares en esta categoría.
Atributos seleccionados: 0

Esta funcionalidad requiere que JavaScript esté habilitado.

CNHTS:
8542339000
CAHTS:
8542330000
USHTS:
8542330001
MXHTS:
8542330299
ECCN:
EAR99

INA381/INA381-Q1 Current Sensing Amplifiers

Texas Instruments INA381/INA381-Q1 Voltage Output Current Sensing Amplifiers offer both a 26V common-mode, current-sensing amplifier and a high-speed comparator configured to detect overcurrent conditions. This is achieved by measuring the voltage developed across a current-shunt resistor and comparing that voltage to a defined threshold limit set by the comparator reference pin. The current-shunt monitor can measure differential voltage signals on common-mode voltages. This can vary from –0.2V up to 26V, independent of the supply voltage. The open-drain alert output can be configured to operate in either a transparent mode or in a latched mode. The transparent mode produces an output status that follows the input state. The latched mode sends the alert output until it is cleared when the latch is reset. Allowing for quick detection of overcurrent events, the standalone comparator alert response time is under 3µs. The total system overcurrent protection offered by the device is under 10µs. The Texas Instruments INA381/INA381-Q1 draws a maximum supply current of 350µA while operating from a single 2.7V to 5.5V supply. The specified operating temperature range (–40°C to +125°C). The INA381-Q1 devices are AEC-Q100 qualified for automotive applications.