DRV8885PWPR

Texas Instruments
595-DRV8885PWPR
DRV8885PWPR

Fabricante:

Descripción:
Motor / Movimiento /Controladores y dispositivos de ignición Stepper Motor Driver A 595-DRV8885PWP A A 595-DRV8885PWP

Modelo ECAD:
Descargue Library Loader gratis para convertir este archivo para su herramienta ECAD. Conozca más sobre el modelo ECAD.

En existencias: 2,427

Existencias:
2,427 Se puede enviar inmediatamente
Plazo de entrega de fábrica:
6 Semanas Tiempo estimado de producción de fábrica para cantidades superiores a las que se muestran.
Mínimo: 1   Múltiples: 1
Precio unitario:
S/-.--
Precio ext.:
S/-.--
Est. Tarifa:
Empaque:
Envase tipo carrete completo (pedir en múltiplos de 2000)

Precio (PEN)

Cantidad Precio unitario
Precio ext.
Cinta cortada / MouseReel™
S/13.08 S/13.08
S/9.81 S/98.10
S/8.99 S/224.75
S/8.10 S/810.00
S/7.67 S/1,917.50
S/7.40 S/3,700.00
S/7.20 S/7,200.00
Envase tipo carrete completo (pedir en múltiplos de 2000)
S/6.85 S/13,700.00
† S/23.00 Se agregará y calculará la tarifa de MouseReel™ en su carrito de compras. Ningún artículo de MouseReel™ se puede cancelar ni devolver.

Embalaje alternativo

N.º de artículo del Fabricante:
Embalaje:
Tube
Disponibilidad:
En existencias
Precio:
S/25.11
Mín.:
1

Producto similar

Texas Instruments DRV8885PWP
Texas Instruments
Motor / Movimiento /Controladores y dispositivos de ignición Stepper Motor Driver A 595-DRV8885PWPR
Fin de vida útil: Se encuentra obsoleto y será discontinuado por el fabricante.

Atributo del producto Valor de atributo Seleccionar atributo
Texas Instruments
Categoría de producto: Motor / Movimiento /Controladores y dispositivos de ignición
RoHS:  
Stepper Motor Controllers / Drivers
Half Bridge
1.5 A
5 mA
- 40 C
+ 125 C
SMD/SMT
HTSSOP-24
Reel
Cut Tape
MouseReel
Marca: Texas Instruments
País de ensamblaje: Not Available
País de difusión: Not Available
País de origen: TW
Régimen del voltaje de carga: 8 V to 37 V
Sensibles a la humedad: Yes
Número de salidas: 2 Output
Frecuencia de trabajo: 100 kHz
Tipo de producto: Motor / Motion / Ignition Controllers & Drivers
Serie: DRV8885
Cantidad de empaque de fábrica: 2000
Subcategoría: PMIC - Power Management ICs
Voltaje de alimentación - Máx.: 37 V
Voltaje de alimentación - Mín.: 8 V
Peso de la unidad: 91.600 mg
Productos encontrados:
Para mostrar productos similares, seleccione al menos una casilla de verificación
Seleccione al menos una de las casillas de verificación anteriores para mostrar productos similares en esta categoría.
Atributos seleccionados: 0

Esta funcionalidad requiere que JavaScript esté habilitado.

CNHTS:
8542391000
CAHTS:
8542390000
USHTS:
8542310030
JPHTS:
854239099
TARIC:
8542399000
MXHTS:
8542399901
ECCN:
EAR99

DRV8x Integrated Motor Drivers

Texas Instruments DRV8x motor drivers are intended to drive an electromagnetic machine, such as a brushed or brushless motor, stepper motor, or other electromechanical actuator. The TI DRV8x family of integrated motor drivers enable designers to quickly and easily spin their motors, reducing time to market and greatly simplifying design. By integrating the gate drive circuitry, sense amps, protection, FETS, industry standard control interfaces, and drive algorithms, the design complexity, board space, and time to spin a motor have all be greatly reduced. With on-chip protection including overcurrent, thermal, shoot-through, and undervoltage, the DRV8x family is robust, reliable, and fully protected.

DRV8885 1.5A Stepper Motor Driver

Texas Instruments DRV8885 1.5A Stepper Motor Driver is a stepper motor driver for industrial equipment applications. The device has two N-channel power MOSFET H-bridge drivers, a micro-stepping indexer, and an integrated current sense. The DRV8885 is capable of driving up to 1.5A full scale or 1.0Arms output current. The Texas Instruments DRV8885 integrated current-sense functionality eliminates the need for two external sense resistors. The STEP/DIR pins provide a simple control interface. The device can be configured in full-step up to 1/16 step modes. A low-power sleep mode is provided for very low quiescent current standby using a dedicated nSLEEP pin. Internal protection functions are provided for under-voltage, charge pump faults, overcurrent, short circuits, and overtemperature. Fault conditions are indicated by an nFAULT pin.