DAC8760IRHAR

Texas Instruments
595-DAC8760IRHAR
DAC8760IRHAR

Fabricante:

Descripción:
Conversores digitales a analógicos - DAC SGL-CH 16B Prgrmble Crnt/VOut DAC A 595- A 595-DAC8760IRHAT

Modelo ECAD:
Descargue Library Loader gratis para convertir este archivo para su herramienta ECAD. Conozca más sobre el modelo ECAD.

En existencias: 2,615

Existencias:
2,615 Se puede enviar inmediatamente
Plazo de entrega de fábrica:
12 Semanas Tiempo estimado de producción de fábrica para cantidades superiores a las que se muestran.
Mínimo: 1   Múltiples: 1
Precio unitario:
S/-.--
Precio ext.:
S/-.--
Est. Tarifa:
Empaque:
Envase tipo carrete completo (pedir en múltiplos de 2500)

Precio (PEN)

Cantidad Precio unitario
Precio ext.
Cinta cortada / MouseReel™
S/50.64 S/50.64
S/39.86 S/398.60
S/37.17 S/929.25
S/34.22 S/3,422.00
S/32.77 S/8,192.50
S/31.92 S/15,960.00
S/31.26 S/31,260.00
Envase tipo carrete completo (pedir en múltiplos de 2500)
S/28.69 S/71,725.00
5,000 Presupuesto
† S/23.00 Se agregará y calculará la tarifa de MouseReel™ en su carrito de compras. Ningún artículo de MouseReel™ se puede cancelar ni devolver.

Embalaje alternativo

N.º de artículo del Fabricante:
Embalaje:
Reel, Cut Tape, MouseReel
Disponibilidad:
En existencias
Precio:
S/74.50
Mín.:
1

Producto similar

Texas Instruments DAC8760IRHAT
Texas Instruments
Conversores digitales a analógicos - DAC SGL-CH 16B Prgrmble Crnt/VOut DAC A 595- A 595-DAC8760IRHAR

Atributo del producto Valor de atributo Seleccionar atributo
Texas Instruments
Categoría de producto: Conversores digitales a analógicos - DAC
RoHS:  
DAC8760
16 bit
40 kS/s
1 Channel
25 us
Current Buffered, Voltage Buffered
SPI
- 18 V to 0 V, 10 V to 36 V
2.7 V to 5.5 V
- 40 C
+ 125 C
SMD/SMT
VQFN-40
Reel
Cut Tape
MouseReel
Marca: Texas Instruments
DNL - No linealidad diferencial: +/- 1 LSB
Características: Current Output, Low Power
Error en ganancia: 0.07 % FSR
INL - No linealidad integral: +/- 3 LSB
Sensibles a la humedad: Yes
Consumo de energía: 135 mW
Tipo de producto: DACs - Digital to Analog Converters
Cantidad de empaque de fábrica: 2500
Subcategoría: Data Converter ICs
Peso de la unidad: 54.300 mg
Productos encontrados:
Para mostrar productos similares, seleccione al menos una casilla de verificación
Seleccione al menos una de las casillas de verificación anteriores para mostrar productos similares en esta categoría.
Atributos seleccionados: 0

Esta funcionalidad requiere que JavaScript esté habilitado.

CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
JPHTS:
854239099
TARIC:
8542399000
MXHTS:
8542399999
ECCN:
EAR99

DAC8760/7760 Digital-to-Analog Converters

Texas Instruments DAC7760 and DAC8760 are low-cost, precision, fully-integrated, 12-bit and 16-bit digital-to-analog converters (DACs) designed to meet the requirements of industrial process-control applications. These devices can be programmed as a current output with a range of 4mA to 20mA, 0mA to 20mA, or 0mA to 24mA; or as a voltage output with a range of 0V to 5V, 0V to 10V, ±5V, or ±10V, with a 10% overrange (0V to 5.5V, 0 V to 11V, ±5.5V, or ±11V). Both current and voltage outputs can be simultaneously enabled while being controlled by a single data register. These devices include a power-on-reset function to ensure powering up in a known state (both IOUT and VOUT are disabled and in a Hi-Z state). The CLR and CLR-SEL pins set the voltage outputs to zero- scale or midscale, and the current output to the low end of the range, if the output is enabled. Zero and gain registers can be programmed to digitally calibrate the device in the end system. The output slew rate is also programmable by register. Texas Instruments DAC7760 and DAC8760 can superimpose an external HART® signal on the current output and can operate with either a single +10-V to +36-V supply, or dual supplies of up to ±18V. All versions are available in both 6-mm × 6-mm QFN-40 and TSSOP-24 packages.